ENGLISH
1 Set Up Your Hardware
Internet3
2
1
Do the following to make hardware connections for initial setup.
1WAN: Connect the WAN port on your NBG318S to the Ethernet port on the device with which you are accessing the Internet (for example, a router or modem) using an Ethernet cable.
2LAN: Connect the Ethernet port on your computer to a LAN port on the NBG318S using the Ethernet cable from the package.
3POWER: Use the power cord from the package to connect the POWER socket to an appropriate power source. This is also your HomePlug AV connection.
The LEDs (lights)
Look at the lights. When you connect the power, the power (
) light blinks and stays on
once the device is ready. The LAN (
) lights turn on if the LAN connections are properly made.
Check your connections if the power (
) or LAN (
) light does not turn on. If this doesn’t help, disconnect the NBG318S from its power source, wait for a few seconds and turn it back on.
3
