Chapter 3 LAN Screen

Figure 9 LAN

The following table describes the labels in this screen.

Table 6 LAN

LABEL

DESCRIPTION

LAN

You can pre-configure two LAN IP addresses, but only one is in use at a time.

 

192.168.1.10 is the default IP address.

 

 

IP Address

Type the IP address of your NXC-8160 in dotted decimal notation.

 

 

IP Subnet Mask

Enter the subnet mask that specifies the network number portion of an IP address.

 

 

VLAN (0-4095)

Enter the VLAN identification number (between 0 and 4095) for the LAN IP

 

address. Otherwise, leave this field blank.

 

The LAN IP address’s VLAN ID should be unique and cannot be in the same VLAN

 

group as an SSID. That means if you enable VLAN, wireless clients (connected to

 

an SSID on the NXC-8160) cannot communicate with the LAN IP address to

 

configure the NXC-8160. With VLAN, an SSID can still access the Internet through

 

the NXC-8160.

 

Note: All centralized configuration members and the master NXC-

 

8160 should belong to the same VLAN group.

 

 

2nd IP Address

Enter a second IP address as the NXC-8160’s backup IP address. It should be in a

 

different subnet from the primary one.

 

 

2nd IP Subnet

Enter the subnet mask that specifies the network number portion of the second IP

Mask

address.

 

 

2nd VLAN (0-

Enter the VLAN ID of the second IP address. Otherwise, leave this field blank.

4095)

 

 

 

Default Gateway

Enter the IP address of the gateway.

 

 

System Name

Choose a descriptive name for identification purposes. It is recommended you

 

enter your computer’s “Computer name” in this field. This name can be up to 30

 

alphanumeric characters long. Spaces are not allowed, but dashes “-” and

 

underscores "_" are accepted.

 

 

Apply

Click Apply to save your changes back to the NXC-8160.

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

39

NXC-8160 User’s Guide