7

Access Points Screen

Click Access Points to display the screen as shown. This screen allows you to view the status of the access points (APs) connected to the NXC-8160. You can also use this screen to set the NXC-8160 not to supply power to an AP.

Figure 26 Access Points

The following table describes the labels in this screen.

Table 22 Access Points

LABEL

DESCRIPTION

Active Access

This field is grayed out and shows whether an access point connected to the WLAN

Points

port is active (selected) or not (cleared). By default, an AP receives power from the

 

NXC-8160 and is activated automatically when it is connected to the NXC-8160.

 

The check boxes correspond to the WLAN ports on the front panel of the NXC-

 

8160.

 

 

Power-On APs

Select a check box to have the NXC-8160 supply power to the AP connected to this

 

port. Otherwise, clear the check box and the NXC-8160 stops supplying power to

 

the AP connected to this port after you click Apply.

 

 

Apply

Click Apply to save your customized settings.

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

 

67

NXC-8160 User’s Guide