4.This is the final wizard screen.
Select High, Mid or Low priority for each service to have your Prestige limit the bandwidth used by
If the rules set up in this wizard are changed in the advanced setup, then the service priority will be set to Other.
The Advanced Media Bandwidth Management configuration screens allow you to edit set class configurations and edit these rules.
Click Finish to save and complete the wizard setup.
Well done! You have finished configuration of Media Bandwidth Management using the Internet Access Wizard. You may now continue configuring your device.
Click any menu link in the navigation panel to access its configuration screen.
Click MAINTENANCE to see your system information, statistics, perform firmware and configuration file maintenance. Click LOGOUT to exit the web configurator. This is recommended for security reasons after you finish a management session. You need to log in again with your password after you log out.
4.4 Test Your Internet Connection
Launch your web browser and navigate to www.zyxel.com. You don’t need a
5 Troubleshooting
PROBLEM | CORRECTIVE ACTION |
|
|
None of the LEDs turn | Make sure that you have the correct power adapter connected to the Prestige and plugged in |
on when you turn on the | to an appropriate power source. Check all cable connections. |
Prestige. | If the LEDs still do not turn on, you may have a hardware problem. In this case, you should |
| |
| contact your local vendor. |
|
|
Cannot access the | Check the cable connection between the Prestige and your computer or hub. Refer to the |
18