2 Hardware Installation
2.1 Rear Panel
LABEL | DESCRIPTION |
|
|
LAN 10/100M | Use an Ethernet cable to connect at least one computer for initial Prestige configuration. These |
| ports are |
| adjust to the type of Ethernet cable you use |
|
|
WAN 10/100M | Connect your cable/DSL modem to this port with the cable that came with your modem. |
|
|
POWER 12 VAC | Connect the end of the included power adaptor (use only this adapter) to this power socket. |
|
|
After you’ve made the connections, connect the power cable to a power supply and look at the front panel LEDs.
RESET
You only need to use this button if you’ve forgotten the Prestige’s password. It returns the Prestige to the factory defaults (password is 1234, LAN IP address 192.168.1.1. See your User’s Guide for details).
3
