ZyXEL Communications P-334WT quick start WAN IP Address Assignment, DNS Server Address Assignment

P-334WT

WAN IP Address Assignment

Select Get automatically from ISP if your ISP did not assign you a fixed IP address.

Select Use fixed IP address to give the Prestige a fixed, unique IP address. The fixed IP address should be in the same subnet as your broadband modem or router.

Enter a Subnet Mask appropriate to your network and the Gateway IP Address of the neighboring device, if you know it. If you do not, leave the Gateway IP Address field as 0.0.0.0.

DNS Server Address Assignment

Select From ISP if your ISP dynamically assigns DNS server information (and the Prestige’s WAN IP address). The field to the right displays the (read-only) DNS server IP address that the ISP assigns. If you chose From ISP, but the Prestige has a fixed WAN IP address, From ISP changes to None after you click Next. If you chose From ISP for the second or third DNS server, but the ISP does not provide a second or third IP address, From ISP changes to None after you click Next.

Select User-Definedif you have the IP address of a DNS server. Enter the DNS server's IP address in the field to the right. If you chose User-Defined, but leave the IP address set to 0.0.0.0, User-Definedchanges to None after you click Next. If you set a second choice to User-Defined, and enter the same IP address, the second User-Definedchanges to None after you click Next.

Select None if you do not want to configure DNS servers. If you do not configure a system DNS server, you must use IP addresses when configuring VPN, DDNS and the timeserver.

WAN MAC Address

The WAN MAC address field allows users to configure the WAN port's MAC address by either using the factory default or cloning the MAC address from a computer on your LAN. Select Factory Default to use the factory assigned default MAC address. Alternatively, select Spoof this Computer's MAC address - IP Address and enter the IP address of the computer on the LAN whose MAC address you are cloning.

Click Next to continue.

7.This is the final wizard screen you need to configure. Select the Yes radio button and click Finish to enable One-Touch Intelligent Security Technology (OTIST).

15