Chapter 12 Static Route
Figure 91 Static Route > Static Route
The following table describes the labels in this screen.
Table 59 Static Route > Static Route
LABEL | DESCRIPTION |
# | This is the number of an individual static route. |
|
|
Active | This field shows whether this static route is active (Yes) or not (No). |
|
|
Name | This is the name that describes or identifies this route. |
|
|
Destination | This parameter specifies the IP network address of the final destination. Routing is |
| always based on network number. |
|
|
Gateway | This is the IP address of the gateway. The gateway is a router or switch on the same |
| network segment as the device's LAN or WAN port. The gateway helps forward |
| packets to their destinations. |
|
|
Subnet Mask | This is the subnet mask of the static route. |
|
|
Modify | Click the edit icon to go to the screen where you can set up a static route on the |
| ZyXEL Device. |
| Click the delete icon to remove a static route from the ZyXEL Device. A window |
| displays asking you to confirm that you want to delete the route. |
|
|
Apply | Click Apply to save your changes back to the ZyXEL Device. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
Select a static route index number and click Edit. The screen shown next appears. Use this screen to configure the required information for a static route.
178 |
| |
| ||
|
|
|