|
| Chapter 33 System Information & Diagnosis |
| Table 120 Menu 24.1: System Maintenance - Status (continued) | |
| FIELD | DESCRIPTION |
| WAN | This section displays information about the WAN port. |
|
| Note: In a |
|
| status. |
|
|
|
| Line Status | This field displays the port speed and duplex setting if you’re using Ethernet |
|
| encapsulation and Down (line is down or not connected), Idle (line (ppp) idle), |
|
| Dial (starting to trigger a call) or Drop (dropping a call) if you’re using PPPoE |
|
| encapsulation. |
|
|
|
| Transfer Rate | This field shows the transmission speed in kilobits per second on this port. |
|
|
|
| CPU Load | This field displays the percentage of CPU utilization. |
|
|
|
| You may enter 1 to reset the counters or [ESC] to return to menu 24. | |
|
|
|
33.3 System Information and Console Port Speed
This section describes your system and allows you to choose different console port speeds. To get to the System Information and Console Port Speed:
1Enter 24 to go to Menu 24 - System Maintenance.
2Enter 2 to open Menu 24.2 - System Information and Console Port Speed.
3From this menu you have two choices as shown in the next figure:
Figure 204 Menu 24.2: System Information and Console Port Speed
Menu 24.2 - System Information and Console Port Speed
1.System Information
2.Console Port Speed
33.3.1System Information
System Information gives you information about your system as shown below. More specifically, it gives you information on your routing protocol, Ethernet address, IP address, etc.
| 315 |
|
|