Chapter 26 Remote Node Setup
Figure 155 Menu 11.1: Remote Node Profile (node 8)
Menu 11.1 - Remote Node Profile (Backup ISP)
Rem Node Name= ? | Edit PPP Options= No |
Active= Yes | Rem IP Addr= ? |
Outgoing: | Edit IP= No |
Edit Script Options= No | |
My Login= | Telco Option: |
My Password= ******** | |
Authen= CHAP/PAP | Allocated Budget(min)= 0 |
Pri Phone #= ? | Period(hr)= 0 |
Sec Phone #= | |
| Session Options: |
| Edit Filter Sets= No |
| Idle Timeout(sec)= 100 |
The following table describes the labels in this menu.
Table 103 Menu 11.1: Remote Node Profile (node 8)
FIELD | DESCRIPTION |
Rem Node Name | Enter the name of the ISP. |
|
|
Active | Select whether or not you want to use this Internet connection. |
|
|
Outgoing | This section is only enabled for PPPoA or PPPoE connections. |
|
|
My Login | Enter the user name provided by your ISP. |
|
|
My Password | Enter the password provided by your ISP. |
|
|
Retype to Confirm | Enter the password again. |
|
|
Authen | This field appears if you select PPPoE in the Encapsulation field. Select what |
| type of authentication your ISP uses. Select CHAP/PAP if you want the ZyXEL |
| Device to support both choices. |
|
|
Pri Phone # | Type the phone number(s) for this remote node. If the Primary Phone number |
Sec Phone # | is busy or does not answer, your ZyXEL Device dials the Secondary Phone |
| number, if available. Some areas require dialing the pound sign # before the |
| phone number for local calls. Include a # symbol at the beginning of the phone |
| numbers as required. |
|
|
Edit PPP Options | Press [SPACE BAR] to select Yes and press [ENTER] to configure the PPP |
| settings for the backup ISP. Menu 11.2 appears. |
|
|
Rem IP Addr | This field displays the type of routing the ZyXEL Device uses. |
|
|
Edit IP/Bridge | This field is enabled if Route is IP. If you want to set up the WAN IP address |
| and advanced features for the WAN port, press [SPACE BAR] to select Yes |
| and press [ENTER]. Menu 11.3 appears. |
|
|
Edit ATM Options | This field is enabled if Route is IP. Press [SPACE BAR] to select Yes and |
| press [ENTER] to edit the virtual channel and ATM QoS settings. Menu 11.1.6 |
| appears. |
|
|
Edit Advance Options | This field is displayed if you are editing remote node 1, and it is only enabled |
| for PPPoE connections. If you want to set up advanced features for the |
| Internet connection, press [SPACE BAR] to select Yes and press [ENTER]. |
| Menu 11.1.8 appears. |
|
|
Telco Option | This section is only enabled for PPPoA or PPPoE connections. |
|
|
268 |
| |
| ||
|
|
|