Chapter 3 The RESET/ENCRYPT Button
You can use the RESET/ENCRYPT button to create multiple separate powerline networks. Use the RESET/ENCRYPT button on only two PLAs at a time.
1Press the RESET/ENCRYPT button on powerline devices E and F for 0.5 to 3 seconds. This must be done within 2 minutes (120 seconds) of pressing the RESET/ENCRYPT button on the first PLA.
2Wait for about one minute while powerline devices E and F connect.
3Now pair two different PLAs. Press the RESET/ENCRYPT button on powerline devices G and H for 0.5 to 3 seconds and within two minutes of each other.
4Wait for about one minute while powerline devices G and H connect.
5When the power (
) and HomePlug (
) lights shine steadily, the devices are connected.
Figure 12 Two Separate Powerline Networks
EF
G
H
If the HomePlug ( ) lights on both powerline devices do not light up, the powerline devices are not connected. Repeat the connection process, making certain you press the RESET/ENCRYPT buttons for the correct time and within two minutes of each other. If that does not work see Section 6.4 on page 47 for suggestions.
3.5 PLAs With One Combination RESET/ENCRYPT Button
Refer to Table 1 on page 7 to see which models have a combination RESET /ENCRYPT button.
22 |
|
PLA Series User’s Guide | |
|
|