ZyXEL AG-220 User’s Guide

4.8.1 Using PEAP in Vista

Take the following steps to set up WPA, WPA2 or 802.1x security using PEAP in Windows Vista.

1Either select the AP to which you want to connect in the Site Survey screen (see Section 4.3 on page 54), or configure a profile in the normal way (see Section 4.4 on page 60).

2In the WPA, WPA2 or 802.1x security screen (see Section 3.2.3.2 on page 40 and Section 3.2.3.3 on page 40), select PEAP as the EAP Type. Note that the Login Name, Logon Domain, and Password fields are not available in the Vista utility, you will be able to enter them in the Vista Security screen below.

3Click Next.

4In the Summary screen that appears, click Save.

5A message similar to the following appears in the bottom-right of your screen. Click the message.

Figure 45 Vista Security: Additional Information Required

6The Enter Credentials screen displays. Enter your User name and Password for the network to which you want to connect.

Figure 46 Vista Security: Enter Credentials

Note: If you are not sure what to enter, contact your network administrator.

7Click OK. The Enter Credentials screen disappears and the AG-220 tries to connect to the network. The ZyXEL utility’s Link Info screen displays, showing the connection status (see Section 4.2 on page 52). If the Link Info screen displays an active connection, you have successfully completed the procedure.

4.8.2Using TLS in Vista

Take the following steps to set up WPA, WPA2 or 802.1x security using TLS in Windows Vista.

70

Chapter 4 Wireless Station Mode Configuration