ZyXEL AG-220 User’s Guide

Figure 52 Access Point Mode: Advanced

The following table describes the labels in this screen.

Table 20 Access Point Mode: Advanced

LABEL

DESCRIPTION

 

 

Advanced Setting

 

 

 

Frequency

Choose a network mode. Select 802.11b+g to have your AG-220 connect to

 

other wireless devices in either IEEE 802.11 b or 802.11g modes. Alternatively,

 

select 802.11g, 802.11b or 802.11a to have your AG-220 connect to other

 

wireless devices in b, g or a mode only.

Save

Click Save to save the changes to the AG-220. If you are connected to a

 

wireless network when changing network modes, the AG-220 will disconnect

 

and then attempt to reestablish the connection using the new setting.

5.5 The MAC Filter Screen

The MAC Filter screen allows you to configure the AG-220 to give exclusive access to devices (Accept) or exclude devices from connecting to the AG-220 (Reject). The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC address of the device(s) to configure this screen. See Section 3.2.2 on page 38 for more information.

78

Chapter 5 Access Point Mode Configuration