ZyXEL AG-220 User’s Guide

1Either select the AP to which you want to connect in the Site Survey screen (see Section 4.3 on page 54), or configure a profile (see Section 4.4 on page 60) in the normal way.

2In the WPA, WPA2 or 802.1x security screen, select TLS as the EAP Type. Note that the Login Name and Certificate fields are not available. You will be able to configure these soon in the Vista Security screens below.

3Click Next.

4In the Summary screen, click Save.

5A message similar to the following appears in the bottom-right of your screen. Click the message.

Figure 47 Vista Security: Additional Information Required

6The Select Certificate screen displays. Select the certificate you want to use in order to authenticate with the server, and enter your username.

Figure 48 Vista Security: Select Certificate

Note: If you do not have the right certificate, or are not sure which certificate you should use, contact your network administrator.

7Click OK. The Select Certificate screen disappears and the AG-220 tries to connect to the network. The ZyXEL utility’s Link Info screen displays, showing the connection status (see Section 4.2 on page 52). If the Link Info screen displays an active connection, you have successfully completed the procedure.

Chapter 4 Wireless Station Mode Configuration

71