Husqvarna CTH171, CTH172, CTH191 To Assemble Bagger, Bagger adjustment, Horizontal adjustment

Page 24

2

1

 

 

 

2

 

 

 

4

1.

Front bagger tube

3

 

 

 

2

2.

Lower bagger tube

0259

 

 

3.

1/4 x 50,8mm Carriage

 

 

 

Bolts

 

 

4.

1/4 Lock nut

 

 

5

3

2

7 6

8

02593

To Assemble Bagger

NOTE: For ease of assembly, you may wish to obtain the assistance of another person when putting the bagger to- gether.

Holes in front bagger tube are at an angle. Place front bagger tube against lower bagger tube and check for proper hole alignment before assembling bolts.

Assemble front and lower bagger tubes using four (4) 1/4 x 50,8mm carriage bolts and lock nuts supplied. Tighten securely.

Slide front and lower bagger tube assembly into the bag- ger assemby.

Assemble front and upper bagger tubes using four (4) 1/4 x 50,8mm carraige bolts and lock nuts supplied. Tighten securely.

Slip all the vinyl bindings over the bagger tubes

Slide the bagger dump handle through the hole in the bagger top, install the clevis pin and secure with retainer spring.

Push cap over end of bagger dump handle.

NOTE: For future use, the clevis pin may be removed in order to use the handle to clear the chute in the event it has become clogged.

1. Front bagger tube

1

2.1/4 x 50,8mm Carriage Bolts

3.1/4 Lock nut

4.Vinyl Binding

5.Dump handle tube

6.Clevis pin

7.Retainer spring

8.Cap

2

3

4

6MM (1/4") - 9MM (3/8")

1

02329

Bagger adjustment

For proper bag function and appearance, it may be neces- sary to adjust the bagger assembly. There should be 6mm (1/4")-9mm (3/8") gap between the bagger top and fender and the bagger top surface should be even with the top surface of the fender. To adjust bagger position:

Horizontal adjustment

Slightly loosen the nuts securing the bagger RH and LH horizontal adjustment brackets. Loosen only enough so the brackets keep their position, but allow them to be moved.

Move the brackets the amount forward or backward you wish the bag assembly to move. Retighten the nuts se- curely.

Vertical adjustment

Slightly loosen the nuts securing the vertical adjustment

 

brackets. Loosen only enough so the brackets keep their

 

position, but allow them to be moved.

Move the brackets the amount up or down you wish the

1. Top Surfaces Even

2.Horizontal Adjustment Bracket

3.Vertical Adjustment Bracket

1

2

 

 

A

 

 

 

3

 

1.

Handle

 

A

 

 

 

2.

Retainer Spring

 

 

3.

Pin

 

02

4.

Plug

4

214

 

bag assembly to move. Retighten the nuts securely.

• Reinstall the bagger assembly and check the bagger to

fender fi t. If necessary, repeat the procedure until proper

fi t is attained.

To convert to bagging, mulching or discharge See "Section 5" of this manual.

To assemble and install mulcher plug

Remove spring retainer and pin from handle.

Insert plug into handle. Make sure that the letter "A" on both the plug and handle are on the same side and that they can both be seen from the top when laying on the ground.

Secure with pin and retainer spring provided. For in- stallation see "To Convert Mower" in Section 5 of this manual.

24

Image 24
Contents Manuel d’instructions Manuale di istruzioniAnleitungshandbuch InstructieboekjePage Safety Rules TrainingII.Preparation III. OperationIV. Maintenance and Storage Sicherheitsvorschriften SchulungII. Vorbereitung III. BetriebIV. Wartung UND Lagerung Règles de Sécurité Précautions D’UTILISATIONII. Préparation III. UtilisationIV. Entretien ET Entreposage Reglas De Seguridad InstrucciónII.PREPARACIÓN III. OperaciónIV. Mantenimiento Y Almacenamiento Norme Antinfortunistiche Addestramento ALL’USOII. Preparazione III. FunzionamentoIV. Manutenzione E Periodi DI INATTIVITA’ Veiligheidsregels TrainingII. Voorbereiding III. BedieningEN8361997/A2 IV. Onderhoud EN OpslagReverse Neutral High No Operation On Slopes More than Nicht AUF Abhängen MIT Gefahr ZU Vermeiden Schwefelsäure Augen Unver Augen Schützen Steering Wheel LenkradVolant DE Direction Volante DE DirecciónVolante HET StuurHinweis RemarqueNota Install battery Installazione della batteriaAccu installeren Einbau der BatteriePage To install bagger components to tractor Discharge Chute Nut Flat WasherBagger adjustment Horizontal adjustmentVertical adjustment To assemble and install mulcher plugInstallation der Aufhängung der Grasfangbox des Traktors Auswurfkanal Kontermutter 3/8 Flache unterlegscheibe10,3mm 13/32 Montage und Installation des Mulcheinsatzes Montage der GrasfangboxJustieren der Grasfangbox SeitenjustierungAssemblage des composants du collecteur Goulotte déjection Ecrou 3/8 Rondelle plateEpingle Pour assembler le collecteur Positionnement du collecteurRéglage de la position horizontale Réglage de la position verticaleDescarga de adaptarse Tuercas de 3/8 Arandelas planas Arandelas planas de 13/32Clavija hendida Cuando éste se mueve en un terreno desigualPara montar el contenedor Regulacion del contenedorAjuste horizontal Ajuste verticalPer montare i componenti del cesto di raccolta Convogliatore di scarico Dadi 3/8 Rondella PiattaCoppiglia Per Iinstallazione del Kit Mulching Per montare il cesto di raccoltaRegolazione del cesto Regolazione orizzontaleAfvoertrechter Borgmoer Vlakke sluitring Stennijzer SluitveerVlakke sluitring 10,3 mm Borgmoer 3/8 Vlakke sluitring SteunHet monteren en installeren van de mulchplug De grascontainer monterenAfstellen van grascontainer Horizontale bijstellingTo Adjust Gauge Wheels Einstellen DER TasträderReglage DES Roulettes DE Jauge Para Ajustar LAS Ruedas CalibradorasPositioning of controls Anordnung der BedienungseinrichtungenEmplacement des commandes ComandiUbicación de los mandosè De plaats van de bedieningsorganenCommande des gaz et starter Gas-und kaltstarthebelMandos del acelerador y del estrangulador Comando gas/chokeBrake and clutch pedal Brems- und KupplungspedalPédale dembrayage et de frein Pedal de freno y de embragueLevier de commande de la transmission hydrostatique Motion control leverEin- und Ausschalten des Antriebes Acoplamiento/desacoplamiento de la trans- misiónCommande dembrayage et de débrayage du carter de coupe Connection/disconnection of the cutting unitEin- und Ausschalten des Mähaggregats Acoplamiento y desacoplamiento del equipo de corteZündschloß Cerradura de encendidoChiave di accensione Clé de contact et de démarrageFrein de stationnement Freno de estacionamientoFreno di parcheggio ParkeerremCutting height setting 10. Mähhöheneinstellung10. Réglage de la hauteur de coupe Ajuste de la altura de corteFilling up Reposición de combustible TankenPlein de carburant RifornimentoOil level ÖlstandNiveau d’huile Nivel de aceiteTire air pressure ReifendruckPression de gonflage des pneus Presión de inflado de los neumáticosDriving . Betrieb . Conduite . Conducción Guida . Rijden Motore freddo Portare il comando del gas su choke Hinweis IMPORTANT! Cold Starting for Hydro ATTENZIONE! Avviamento a Freddo PER TrasmissionBELANGRIJK! Loud Starten Voor Hydro Purge TransmissionPurgar LA Transmisión Spurgo Della TrasmissioneTransmissie Ontluchten Su tractor esta ahora dispuesto para la operación nor- malDriving BetriebConduite ConducciónCutting tips Ratschläge zum RasenmähenConseils pour la tonte Consejos para el corte Consigli per il taglio dell’erbaMaaitips To Dump Bagger Entleeren der GrasfangboxPour vider le bac Para vaciar la cargadoraTo convert mower Pour passer dune fonction à une autrePour broyer Para cambiar el ajuste de la segadora Regolazione della funzione di taglioDe Maaier Ombouwen Warnung AdvertenciaPericolo WaarschuwingSwitching off the engine Abstellen des MotorsArrêt du moteur Parada del motorAdvertencia Engine hood MotorhaubeCapot moteur Cubierta del motorMaintenance WartungEntretien MantenimientoTo service engine Pour assurer lentretien du moteurMantenimiento del motor Wartung des MotorsService Record WartungsnachweisSchema Dentretien Informe DE ServicioService Aantekeningen Dati DI ServizioBlades MesserbalkenLames CuchillasStar pattern blade Messerbalkenbohrung mit fünfeckige Ausspa- rungLame avec orifice de fixation central étoil à cinq branches Messerbalkenbohrung mit sechseckiger Aus- sparungCuchilla de orificio-estrella de cinco puntas Lama con for stellare a 5 punteMes met 5-hoekige ster Lama con foro stellareBlade Removal Brakes BremseFrein FrenoDismantling of the cutting unit Demontage des MähdecksDepose du Carter de Coupe Desmontaje de la unidad de corteAssembly of the cutting unit Einbau des MähdecksMise en place du carter de coupe Montaje de la unidad de corteReplacement of drive belt for cutting unit Auswechsein des Treibriemens für das Mähag- gregatCambio de la correa propulsora del equipo de corte Sostituzione della cinghia di movimento lameAdjustment of the cutting unit Einstellung des MähaggregatsRéglage du carter de coupe Ajuste de la unidad de corteSIDE-TO-SIDE Adjustment Adjuste DE Lado a LadoSeitliche Einstellung Reglage TransversalVervangen van de aandrijfriem Replacement of drive belt Remplacement de la courroie dentraînementCambio de correa propulsora Sostituzione della cinghia di trazioneTransaxle Motion Control Lever NEU- Tral Adjustment Reglage DU Levier DE LA Commande D’AVANCEMENTEinstellung DES Steuerknüppels DES Schaltgetriebes Page Transaxle Cooling TRANSACHSEN-KÜHLUNGRefroidissement DE LA Transmission Enfriamiento DEL TransejeTroubleshooting . Störungssuche Recherche des pannes . Búsqueda de averías Ricerca guasti . Het localiseren van fouten Service Storage . Aufbewahrung . Rangement . ConservaciónEntretien et réparations ServicioRismessaggio . Stallen ServizioPage 532 19 38-34 Rev 12.6.04 RD

CTH171, CTH172, CTH191 specifications

Husqvarna, a leading name in outdoor power equipment, offers a range of high-performance lawn tractors, including models CTH191, CTH172, and CTH171. Each model is designed for efficiency and ease of use, catering to homeowners seeking a reliable solution for lawn care.

The Husqvarna CTH191 stands out with its powerful 19 HP engine, providing robust performance for tackling various terrains. This model features a 42-inch cutting deck, allowing for wide mowing coverage and reducing the number of passes needed for larger lawns. With its automatic transmission, the CTH191 ensures smooth operation, enabling users to focus on their mowing task without worrying about shifting gears. Additionally, the innovative cutting height adjustment lever allows for effortless customization of grass lengths, accommodating different mowing preferences.

Next in line is the Husqvarna CTH172, which is ideal for homeowners looking for a balance between power and maneuverability. Equipped with a 17 HP engine, it offers adequate performance for medium-sized lawns. The 42-inch cutting deck provides efficient cutting while maintaining compactness, making it easier to navigate around obstacles. One of the key features of the CTH172 is its ergonomic steering wheel and adjustable seat, enhancing comfort during extended mowing sessions. The easy-access controls are designed for user convenience, allowing quick adjustments while on the go.

Finally, the Husqvarna CTH171 is designed for those who prioritize budget-friendly options without compromising on essential features. It comes with a 17 HP engine and a 38-inch cutting deck, making it a practical choice for smaller yards. The compact design not only makes it easy to store but also simplifies maneuvering in tight spaces. The CTH171 also includes an efficient cutting system, providing a clean and even cut every time. Its straightforward controls ensure that it is user-friendly, catering to novice operators and seasoned lawn care enthusiasts alike.

All three models incorporate Husqvarna's commitment to quality and innovation, featuring durable construction and reliability. With advanced technologies such as an efficient air flow system for optimal grass clipping collection and enhanced driver comfort through vibration dampening, these lawn tractors demonstrate Husqvarna's dedication to performance and user satisfaction. Whether you choose the CTH191, CTH172, or CTH171, you can count on a high-quality lawn tractor to maintain your yard beautifully and effortlessly.