Husqvarna YTH22V42 warranty Cleaning

Page 17

MAINTENANCE

ENGINE OIL FILTER

Replace the engine oil filter every season or every other oil change if the tractor is used more than 100 hours in one year. See engine manual.

AIR FILTER

Your engine will not run properly using a dirty air filter. Ser- vice air cleaner more often under dusty conditions.

CLEAN AIR SCREEN

Air screen must be kept free of dirt and chaff to prevent engine damage from overheating. Clean with a wire brush or compressed air to remove dirt and stubborn dried gum fibers.

ENGINE COOLING SYSTEM

To ensure proper cooling, make sure the grass screen, cooling fins, and other external surfaces of the engine are kept clean at all times.

Every 100 hours of operation (more often under extremely dusty, dirty conditions), remove the blower housing and other cooling shrouds. Clean the cooling fins and external surfaces as necessary. Ensure the cooling shrouds are reinstalled.

NOTE: Operating the engine with a blocked grass screen, dirty or plugged cooling fins, and/or cooling shrouds removed will cause engine damage due to overheating.

SPARK PLUGS

Replace spark plugs at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in “PRODUCT SPECIFICATIONS” section of this manual.

MUFFLER

Inspect and replace corroded muffler and spark arrester (if equipped) as it could create a fire hazard and/or damage.

IN-LINE FUEL FILTER (See Fig. 18)

The fuel filter should be replaced once each season. If fuel filter becomes clogged, obstructing fuel flow to carburetor, replacement is required.

•With engine cool, remove filter and plug fuel line sections.

•Place new fuel filter in position in fuel line with arrow pointing towards carburetor.

•Be sure there are no fuel line leaks and clamps are properly positioned.

•Immediately wipe up any spilled gasoline.

CLAMP

CLAMP

FUEL FILTER

Fig. 18

CLEANING

•Clean engine, battery, seat, finish, etc. of all foreign matter.

•Clean debris from steering plate. Debris can restrict clutch/brake pedal shaft movement, causing belt slip and loss of drive.

CAUTION: Avoid all pinch points and movable parts (See Fig. 19)

CLUTCH/BRAKE PEDAL

CLEAN TOP SIDE

STEERING

PLATE

CAUTION:

PINCH

POINTS

STEERING SYSTEM,

DASH, FENDER AND

MOWER NOT SHOWN

Fig. 19

•Keep finished surfaces and wheels free of all gasoline, oil, etc.

•Protect painted surfaces with automotive type wax.

We do not recommend using a garden hose or pressure washer to clean your tractor unless the engine and trans- mission are covered to keep water out. Water in engine or transmission will shorten the useful life of your tractor. Use compressed air or a leaf blower to remove grass, leaves and trash from tractor and mower.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents English/Spanish Operator’s Manual Manual de OperarioSafe Operation Practices for Ride-On Mowers Safety RulesGeneral Operation II. Slope OperationGeneral Service ServiceIII. Children IV. TowingTable of Contents Tools Required for Assembly AssemblyUnassembled Parts ToremovetractorfromcartonCheck Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor To SET Parking Brake See Fig HOW to USE Your TractorStopping See Fig To USE Throttle Control D See FigTo Adjust Gauge Wheels See Fig To Adjust Mower Cutting Height See FigTo USE Cruise Control J See Fig To Operate MowerReverse Operation System ROS Service REMINDER/HOUR MeterTo Operate on Hills To Transport See FigsCheck Engine OIL Level Before Starting the EngineADD Gasoline To Start Engine See FigPurge Transmission Mowing TipsMaintenance MaintenanceGeneral Recommendations ScheduleTractor BatteryBlade Care Blade Removal See FigBelts EngineTransaxle Cooling Transaxle Pump FluidCleaning Deck Washout Port See Fig To Remove Mower See Fig To Install Mower See FigInstall belt on engine pulley M, in belt keepers G To Level Mower To Replace Mower Blade Drive Belt See Fig Belt InstallationTo Check Brake To Replace Motion Drive Belt See FigReplacing Battery See Fig To Start Engine with a Weak Battery See FigTo Remove Wheel See Fig Front Wheel TOE-IN/CAMBERTransmission Fuel System OtherEngine OIL CylindersProblem Cause Correction TroubleshootingEngine continues Fold Along This Dotted Line Degree Slope Only Ride UP and Down Hill Not Across Hill Degrees MAXAdvertencia Reglas DE SeguridadFuncionamiento General II. Funcionamiento EN PendientesIV. Remolque III. NiñosServicio Operaciones DE Servicio GeneralesTabla DE Materias Identificación DE ProblemasEspecificaciones DEL Producto Responsabilidades DEL ClienteMontaje Pedazos Para LA MontajeDesempaque LA Caja DE Cartón Verifique LA Batería Vea FigRevisión DE LA Nivelación DEL CON- Junto Revisión DE LA Presión DE LAS LlantasRevisión DE LA Posición Adecuada DE Todas LAS Correas Revisión DEL Sistema DE FrenosTractor y/o al motor OperaciónDispositivo DE Aviso DE Servicio / Cronómetro Para Ajustar EL Freno DE ESTACIONA- Miento Vea Fig Como Usar SU TractorParada Vea Fig Moversehaciaadelanteyhaciaatrás Vea FigPara Ajustar LAS Ruedas Utilizar EL Mando Crucero Vea FigCalibradoras Vea Fig Para Operar LA SegadoraFuncionamiento Atrás ROS Vea Fig Para Parar LAS Cuchillas DE LA SegadoraPara Operar EN Cerros Para Transportar Vea FigMecanismo DE Aviso DE Servicio / Cronómetro Antes DE Hacer Arrancar EL MotorRevise EL Nivel DE Aceite DEL Motor Agregue GasolinaCalentamiento Para LA Transmision Automatica Purgar LA TransmisiónTabla DE Lubricación MantenimentoBatería Cuidado DE LA CuchillaOperación DEL Freno LlantasLubricación CorreasEnfriamiento DEL Transeje Filtro DEL Aire Filtro DE Aceite DEL MotorLimpieza DE LA Rejilla DE Aire Sistema DE Enfriamiento DE AirePuerto DE Lavado DE LA Cubierta Vea Fig Para Desmontar LA Cortadora DE Césped Vea Fig Servicio Y AjustesConecte el fin de la primavera de cable de embrague Regulación Visual DE Lado a Lado Vea Fig Para Nivelar LA SegadoraRemoción DE LA Correa Para Reemplazar LA Correa DE TRANS- Misión Vea FigPara Hacer Arrancar EL Motor CON UNA Batería Baja Vea Fig Controlar Y Ajustar EL FrenoImpresión / Inclinación DE LAS Ruedas Delanteras Entrecierre Y Relés Para Cambiar LA Bombilla DE LA LUZ DelanteraPara Cambiar EL Fusible REMOCIÓN/REEMPLAZO DE LA TransmisiónOtros AlmacenamientoMotor Problema Causa Corrección Identificación DE ProblemasIdentificación DE Problemas Pendiente 08/24/2011 CL
Related manuals
Manual 44 pages 20.69 Kb Manual 52 pages 16.58 Kb

YTH22V42 specifications

The Husqvarna YTH22V42 is a versatile and robust riding mower designed to meet the needs of homeowners looking for efficiency and durability in lawn care. This model is equipped with a powerful 22-horsepower Kohler engine, delivering reliable performance and enabling easy handling of various terrains. With its automatic transmission, operators can simply push a pedal to control the speed, providing a smooth and enjoyable mowing experience.

One of the standout features of the YTH22V42 is its 42-inch cutting deck, which allows for a wide cutting path, making it suitable for medium to large-sized yards. The cutting deck is reinforced, ensuring longevity and durability, while its air induction technology enhances airflow for a clean and even cut. The cutting height can be easily adjusted with a lever, offering six different settings from 1 to 4 inches.

Another significant characteristic of the YTH22V42 is its ease of use. The ergonomic design of the seat and steering wheel enhances comfort during longer mowing sessions. The mower is equipped with intuitive controls that make it easy for users of all experience levels to operate. Additionally, the unit features built-in anti-scalp wheels to protect the lawn from damage while trimming.

The Husqvarna YTH22V42 also boasts several innovative technologies. The ReadyStart system ensures an easy, no-prime starting of the engine, significantly reducing preparation time before mowing. The mower's compact design allows for easy maneuverability in tight spaces, making it effective for navigating around landscaping or garden features.

Furthermore, the YTH22V42 is compatible with Husqvarna’s extensive range of accessories, enhancing its versatility. From mulching kits to rear baggers, users can customize their mowing experience according to their specific lawn care needs.

In terms of maintenance, the YTH22V42 features a deck washout port, which simplifies cleaning under the cutting deck after use, prolonging the mower's lifespan and ensuring consistent performance. Additionally, the mower's robust construction ensures it can withstand the rigors of regular use.

Overall, the Husqvarna YTH22V42 combines power, comfort, and technology, making it an excellent choice for homeowners seeking a reliable and efficient riding mower. Its thoughtful design and advanced features position it as a leading option in the market, perfect for those looking to maintain a beautiful lawn with ease.
Top Page Image Contents