Husqvarna 1153137-95 manual Maintenance schedule

Page 38

MAINTENANCE

Maintenance schedule

The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section.

Daily maintenance

Weekly maintenance

Monthly maintenance

 

 

 

 

On chain saws without a catalytic

Check the brake band on the chain

 

brake for wear. Replace when less

Clean the outside of the machine.

converter, check the cooling system

than 0.024 inch (0.6 mm) remains at

 

weekly.

 

the most worn point.

 

 

 

 

 

Check that the components of the

Check the starter, starter cord and

Check the clutch centre, clutch drum

throttle control work safely. (Throttle

return spring.

and clutch spring for wear.

lockout and throttle control.)

 

 

 

 

 

Clean the chain brake and check that

 

 

it operates safely. Make sure that the

Check that the vibration damping

Clean the spark plug. Check that the

chain catcher is undamaged, and

elements are not damaged.

electrode gap is 0.020 inch (0.5 mm).

replace it if necessary.

 

 

 

 

 

The bar should be turned daily for

 

 

more even wear. Check the

 

 

lubrication hole in the bar, to be sure it

Lubricate the clutch drum bearing.

Clean the outside of the carburetor.

is not clogged. Clean the bar groove.

 

 

If the bar has a sprocket tip, this

 

 

should be lubricated.

 

 

 

 

 

Check that the bar and chain are

File off any burrs from the edges of

Check fuel hose for cracks or other

getting sufficient oil.

the bar.

damage. Change if necessary.

 

 

 

Check the saw chain with regard to

 

 

visible cracks in the rivets and links,

 

 

whether the saw chain is stiff or

Clean or replace the spark arrestor

Empty the fuel tank and clean the

whether the rivets and links are

screen on the muffler.

inside.

abnormally worn. Replace if

 

 

necessary.

 

 

 

 

 

Sharpen the chain and check its

 

 

tension and condition. Check the

Clean the carburetor compartment.

Empty the oil tank and clean the

drive sprocket for excessive wear and

inside.

 

replace if necessary.

 

 

 

 

 

Clean the starter units air intake.

Clean the air filter. Replace if

Check all cables and connections.

necessary.

 

 

 

 

 

Check that nuts and screws are tight.

 

 

 

 

 

Check that the stop switch works

 

 

correctly.

 

 

 

 

 

Check that there are no fuel leaks

 

 

from the engine, tank or fuel lines.

 

 

 

 

 

On chain saws with a catalytic

 

 

converter, check the cooling system

 

 

daily.

 

 

 

 

 

38 – English

1153137-95 Rev.2 2009-12-29

Page 37 Page 39
Image 38
Page 37 Page 39
Contents 455e Rancher Rancher 460 Rancher Symbols in the operator’s manual KEY to SymbolsSymbols on the machine EPA Contents Introduction Dear customerWhat is WHAT? What is what on the chain saw?Always use common sense General Safety PrecautionsBefore using a new chain saw Chain brake and front hand guard Machine′s safety equipmentPersonal protective equipment General Safety Precautions Right hand guard Throttle lockoutChain catcher Vibration damping systemMuffler Stop switchCutting equipment General rulesBar Sharpening your chain and adjusting depth gauge settingCutting equipment designed to reduce kickback ChainAdjustment of depth gauge setting General advice on adjusting depth gauge settingIncreased if the depth gauge setting is Too largeRancher, 460 Rancher Tensioning the chainBar and cause serious or even fatal injury 455e RancherChecking chain lubrication Lubricating cutting equipmentFilling with chain oil Checking wear on cutting equipment Chain drive sprocketNeedle bearing lubrication Rancher, 460 Rancher AssemblyFitting the bar and chain 455e RancherAssembly Fuel Handling FuelTransport and storage Fuel safetyFueling Long-term storageCold engine Starting and StoppingStarting and stopping Warm engineStopping Before use Basic safety rulesWorking Techniques General working instructionsGeneral rules Basic cutting technique TermsLog is supported at one end. There is a high risk Tree felling techniqueLimbing Safe distanceDirectional cuts Felling directionClearing the trunk and preparing your retreat Freeing a trapped tree Freeing a tree that has fallen badlyFelling cut General advice How to avoid kickbackWhat is kickback? Cutting trees and branches that are in tensionCutting the trunk into logs General MaintenanceCarburetor adjustment Checking brake band wear Correctly adjusted carburetorWhen the bar hits the stump the brake should be applied Checking the front hand guardChecking the brake trigger Changing a broken or worn starter cord MufflerStarter Changing a broken recoil spring Air filterTensioning the recoil spring Fitting the starterLubricating the bar tip sprocket Adjustment of the oil pumpSpark plug Needle bearing lubricationTemperature -5C 23F or colder Air Injection centrifugal cleaningTemperature 0C 32F or colder Winter useMaintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical dataSaw chain filing and file gauges Gauge, Saw chain designationFederal Emission Control Warranty Statement Your Warranty Rights and ObligationsMAINTENANCE, Replacement Repair of EMISSION-RELATED Parts Kickback safety precautions American Standard Safety PrecautionsSafety precautions for chain saw users Other safety precautions1153137-95

1153137-95 specifications

The Husqvarna 1153137-95 is an essential addition to any serious gardener's toolkit, renowned for its remarkable efficiency and innovative design. This advanced garden trimmer is engineered to provide optimal performance, durability, and ease of use, making it perfect for both professional landscapers and home gardening enthusiasts.

One of the standout features of the Husqvarna 1153137-95 is its robust motor. With a powerful engine, this trimmer delivers impressive torque and cutting speed, enabling users to tackle even the toughest grass and weeds with ease. The lightweight construction ensures that operators can handle the unit comfortably during extended use without experiencing fatigue.

The trimmer is designed with advanced technology, including an automatic line feed system. This feature ensures that the cutting line extends automatically when needed, minimizing downtime and allowing users to focus on their trimming tasks without interruption. Additionally, the Husqvarna 1153137-95 boasts an ergonomic design, incorporating adjustable handles and a well-balanced structure that enhances maneuverability and precision during operation.

Another significant characteristic of the Husqvarna 1153137-95 is its cutting path, which is optimally sized to provide efficient coverage without compromising on control. With durable cutting attachments, this trimmer can easily switch between different heads depending on the specific gardening needs, making it a versatile tool capable of edging, trimming, and shaping your garden effortlessly.

The safety features incorporated into the Husqvarna 1153137-95 are noteworthy. The trimmer comes equipped with a protective guard that shields users from debris, while a safety throttle provides additional peace of mind by ensuring the trimmer only operates when desired.

Lastly, the Husqvarna brand is well-regarded for its commitment to sustainability, and the 1153137-95 reflects this ethos, as it is engineered to reduce emissions and improve fuel efficiency. This trimmer represents a blend of cutting-edge technology and practicality, making it an invaluable tool for any gardening project.

In conclusion, the Husqvarna 1153137-95 is a well-rounded garden trimmer that combines power, efficiency, and user-friendly features. Its advanced technologies and safety elements make it a trusted choice for anyone looking to achieve a well-maintained landscape with minimal effort.
Top Page Image Contents