Husqvarna 1153137-95 American Standard Safety Precautions, Safety precautions for chain saw users

Page 43

AMERICAN STANDARD SAFETY PRECAUTIONS

Safety precautions for chain saw users

(ANSI B175.1-2000 Annex C)

Kickback safety precautions

WARNING! Kickback may occur when

!the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut.

Tip contact in some cases may cause a lightning fast reverse reaction, kicking the guide bar up and back towards the operator.

Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the operator.

Either of these reactions may cause you to lose control of the saw which could result in serious personal injury.

Do not rely exclusively upon the safety devices built into your saw. As a chain saw user, you should take several steps to keep your cutting jobs free from accident or injury.

With a basic understanding of kickback, you can reduce or eliminate the element of surprise. Sudden surprise contributes to accidents.

Keep a good firm grip on the saw with both hands, the right hand on the rear handle, and the left hand on the front handle, when the engine is running. Use a firm grip with thumbs and fingers encircling the chain saw handles. A firm grip will help you reduce kickback and maintain control of the saw. Don’t let go.

Make sure that the area in which you are cutting is free from obstacles. Do not let the nose of the guide bar contact a log, branch, or any other obstacle which could be hit while you are operating the saw.

Cut at high engine speeds.

Do not overreach or cut above shoulder height.

Follow manufacturer’s sharpening and maintenance instructions for the saw chain.

Only use replacement bars and chains specified by the manufacturer or the equivalent.

Other safety precautions

WARNING! Do not operate a chain saw

! with one hand! Serious injury to the operator, helpers, bystanders or any combination of these persons may result from one-handed operation. A chain saw is intended for two-handed use.

Do not operate a chain saw when you are fatigued.

Use safety footwear; snug-fitting clothing, protective gloves, and eye, hearing and head protection devices.

Use caution when handling fuel. Move the chain saw at least 10 feet (3 m) from the fueling point before starting the engine.

Do not allow other persons to be near the chain saw when starting or cutting with the chain saw. Keep bystanders and animals out of the work area.

Do not start cutting until you have a clear work area, secure footing and a planned retreat path from the falling tree.

Keep all parts of your body away from the saw chain when the engine is running.

Before you start the engine, make sure that the saw chain is not contacting anything.

Carry the chain saw with the engine stopped, the guide bar and saw chain to the rear, and the muffler away from your body.

Do not operate a chain saw that is damaged, improperly adjusted, or not completely and securely assembled. Be sure that the saw chain stops moving when the throttle control trigger is released.

Shut off the engine before setting the chain saw down.

Use extreme caution when cutting small size brush and saplings because slender material may catch the saw chain and be whipped toward you or pull you off balance.

When cutting a limb that is under tension be alert for springback so that you will not be struck when the tension in the wood fibers is released.

Keep handles dry, clean and free of oil or fuel mixture.

Operate the chain saw only in well-ventilated areas.

Do not operate a chain saw in a tree unless you have been specifically trained to do so.

Do not operate a chain saw above shoulder height.

All chain saw service, other than the items listed in the operator’s/owner’s safety and maintenance instructions, should be performed by competent chain saw service personnel. (For example, if improper tools are used to remove the flywheel or if an improper tool is used to hold the flywheel in order to remove the clutch, structural damage to the flywheel could occur and subsequently cause the flywheel to burst.)

When transporting your chain saw, use the appropriate guide bar guard.

Note:This Annex is intended primarily for the consumer or occasional user.

1153137-95 Rev.2 2009-12-29

English – 43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents 455e Rancher Rancher 460 Rancher Symbols on the machine KEY to SymbolsSymbols in the operator’s manual EPA Contents Dear customer IntroductionWhat is what on the chain saw? What is WHAT?Before using a new chain saw General Safety PrecautionsAlways use common sense Personal protective equipment Machine′s safety equipmentChain brake and front hand guard General Safety Precautions Vibration damping system Throttle lockoutChain catcher Right hand guardGeneral rules Stop switchCutting equipment MufflerChain Sharpening your chain and adjusting depth gauge settingCutting equipment designed to reduce kickback BarToo large General advice on adjusting depth gauge settingIncreased if the depth gauge setting is Adjustment of depth gauge setting455e Rancher Tensioning the chainBar and cause serious or even fatal injury Rancher, 460 RancherFilling with chain oil Lubricating cutting equipmentChecking chain lubrication Needle bearing lubrication Chain drive sprocketChecking wear on cutting equipment 455e Rancher AssemblyFitting the bar and chain Rancher, 460 RancherAssembly Fuel Fuel HandlingLong-term storage Fuel safetyFueling Transport and storageWarm engine Starting and StoppingStarting and stopping Cold engineStopping General working instructions Basic safety rulesWorking Techniques Before useGeneral rules Terms Basic cutting techniqueSafe distance Tree felling techniqueLimbing Log is supported at one end. There is a high riskClearing the trunk and preparing your retreat Felling directionDirectional cuts Felling cut Freeing a tree that has fallen badlyFreeing a trapped tree Cutting trees and branches that are in tension How to avoid kickbackWhat is kickback? General adviceCutting the trunk into logs Carburetor adjustment MaintenanceGeneral Checking the front hand guard Correctly adjusted carburetorWhen the bar hits the stump the brake should be applied Checking brake band wearChecking the brake trigger Starter MufflerChanging a broken or worn starter cord Fitting the starter Air filterTensioning the recoil spring Changing a broken recoil springNeedle bearing lubrication Adjustment of the oil pumpSpark plug Lubricating the bar tip sprocketWinter use Air Injection centrifugal cleaningTemperature 0C 32F or colder Temperature -5C 23F or colderDaily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataGauge, Saw chain designation Saw chain filing and file gaugesYour Warranty Rights and Obligations Federal Emission Control Warranty StatementMAINTENANCE, Replacement Repair of EMISSION-RELATED Parts Other safety precautions American Standard Safety PrecautionsSafety precautions for chain saw users Kickback safety precautions1153137-95

1153137-95 specifications

The Husqvarna 1153137-95 is an essential addition to any serious gardener's toolkit, renowned for its remarkable efficiency and innovative design. This advanced garden trimmer is engineered to provide optimal performance, durability, and ease of use, making it perfect for both professional landscapers and home gardening enthusiasts.

One of the standout features of the Husqvarna 1153137-95 is its robust motor. With a powerful engine, this trimmer delivers impressive torque and cutting speed, enabling users to tackle even the toughest grass and weeds with ease. The lightweight construction ensures that operators can handle the unit comfortably during extended use without experiencing fatigue.

The trimmer is designed with advanced technology, including an automatic line feed system. This feature ensures that the cutting line extends automatically when needed, minimizing downtime and allowing users to focus on their trimming tasks without interruption. Additionally, the Husqvarna 1153137-95 boasts an ergonomic design, incorporating adjustable handles and a well-balanced structure that enhances maneuverability and precision during operation.

Another significant characteristic of the Husqvarna 1153137-95 is its cutting path, which is optimally sized to provide efficient coverage without compromising on control. With durable cutting attachments, this trimmer can easily switch between different heads depending on the specific gardening needs, making it a versatile tool capable of edging, trimming, and shaping your garden effortlessly.

The safety features incorporated into the Husqvarna 1153137-95 are noteworthy. The trimmer comes equipped with a protective guard that shields users from debris, while a safety throttle provides additional peace of mind by ensuring the trimmer only operates when desired.

Lastly, the Husqvarna brand is well-regarded for its commitment to sustainability, and the 1153137-95 reflects this ethos, as it is engineered to reduce emissions and improve fuel efficiency. This trimmer represents a blend of cutting-edge technology and practicality, making it an invaluable tool for any gardening project.

In conclusion, the Husqvarna 1153137-95 is a well-rounded garden trimmer that combines power, efficiency, and user-friendly features. Its advanced technologies and safety elements make it a trusted choice for anyone looking to achieve a well-maintained landscape with minimal effort.
Top Page Image Contents