Husqvarna 1151338-95 manual Throttle lockout, Chain catcher, Right hand guard

Page 10

GENERAL SAFETY PRECAUTIONS

of the front hand guard, the chain brake can only be activated by the inertia action.

Will my hand always activate the chain brake during a kickback?

No. It takes a certain force to move the hand guard forward. If your hand only lightly touches the front guard or slips over it, the force may not be enough to trigger the chain brake. You should also maintain a firm grip of the chain saw handles while working. If you do and experience a kickback, your hand may never leave the front handle and will not activate the chain brake, or the chain brake will only activate after the saw has swung around a considerable distance. In such instances, the chain brake might not have enough time to stop the saw chain before it touches you.

There are also certain positions in which your hand cannot reach the front hand guard to activate the chain brake; for example, when the saw chain is held in felling position.

Will my inertia activated chain brake always activate during kickback in the event of a kickback?

No. First your brake must be in working order. Testing the brake is simple, see instructions under the heading Checking, maintaining and servicing chain saw safety equipment. We recommend you do before you begin each work session. Second the kickback must be strong enough to activate the chain brake. If the chain brake is too sensitive it would activate all the time which would be a nuisance.

Will my chain brake always protect me from injury in the event of a kickback?

No. First, the chain brake must be in working order to provide the intended protection. Second, it must be activated during the kickback as described above to stop the saw chain. Third, the chain brake may be activated but if the bar is too close to you the brake might not have enough time to slow down and stop the chain before the chain saw hits you.

Only you and proper working technique can eliminate kickback and its danger.

Throttle lockout

The throttle lockout is designed to prevent accidental operation of the throttle control. When you press the lock

(A)(i.e. when you grasp the handle) it releases the throttle control (B). When you release the handle the throttle control and the throttle lockout both move back to their original positions. This arrangement means that the throttle control is automatically locked at the idle setting.

Chain catcher

The chain catcher is designed to catch the chain if it snaps or jumps off. This should not happen if the chain is properly tensioned (see instructions under the heading Assembly) and if the bar and chain are properly serviced and maintained (see instructions under the heading General working instructions).

Right hand guard

Apart from protecting your hand if the chain jumps or snaps, the right hand guard stops branches and twigs from interfering with your grip on the rear handle.

10 – English

Page 9 Page 11
Image 10
Page 9 Page 11
Contents 395XP Symbols in the operator’s manual KEY to SymbolsSymbols on the machine You will find the following labels on your chain sawEPA Contents Introduction Dear customerWhat is WHAT? What is what on the chain saw?General Safety Precautions Before using a new chain sawPersonal protective equipment Machine′s safety equipmentAlways use common sense Chain brake and front hand guardGeneral Safety Precautions Chain catcher Throttle lockoutRight hand guard Vibration damping system Stop switchCutting equipment MufflerBar Cutting equipment designed to reduce kickbackChain Sharpening your chain and adjusting depth gauge setting General information on sharpening cutting teethTensioning the chain Lubricating cutting equipment Needle bearing lubrication Chain drive sprocketChecking wear on cutting equipment Fitting the bar and chain AssemblyWorking with the chain Fuel Handling FuelTransport and storage Fuel safetyFueling Long-term storageCold engine Starting and StoppingStarting and stopping Warm engineStopping Before use Basic safety rulesWorking Techniques General working instructionsGeneral rules Basic cutting technique TermsTree felling technique Clearing the trunk and preparing your retreat Felling directionDirectional cuts Felling cut What is kickback? How to avoid kickbackFreeing a tree that has fallen badly Cutting the trunk into logs Maintenance Carburetor adjustmentCorrectly adjusted carburetor Fine adjustment of the idling speed THigh speed jet H Checking the inertia brake release ImmediatelyMuffler Tensioning the recoil spring Changing a broken or worn starter cordChanging a broken recoil spring Lubricating the bar tip sprocket Air filterSpark plug Fitting the starterWhen making adjustments Adjustment of the oil pumpAir Injection centrifugal cleaning Needle bearing lubricationWinter use Heated handlesMaintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical data058/1,5 mm Saw chain filing and file gauges050/1,3 mm 063/1,6 mmFederal Emission Control Warranty Statement Your Warranty Rights and ObligationsOther safety precautions American Standard Safety PrecautionsSafety precautions for chain saw Kickback safety precautionsPage 1151338-95

1151338-95 specifications

The Husqvarna 1151338-95 is an innovative chainsaw that exemplifies the blend of power, performance, and user-friendly features, making it a popular choice among both amateur woodworkers and professional landscapers. Designed with a 14-inch cutting bar, this chainsaw is ideal for pruning, trimming, and cutting small to medium-sized trees, providing the versatility needed for various tasks.

One of the main features of the Husqvarna 1151338-95 is its powerful X-Torq engine. This engine is designed to deliver maximum power while minimizing fuel consumption and emissions, making it environmentally friendly. The X-Torq technology ensures that users experience less vibration while operating the chainsaw, reducing fatigue during prolonged use. This feature enhances overall comfort and allows for more precise control.

In addition to its eco-friendly engine, the Husqvarna 1151338-95 is equipped with Smart Start technology, which facilitates easy starting with minimal effort. The fuel pump and choke are designed to work in harmony, enabling the user to start the saw quickly, even in cold conditions. This is particularly beneficial for those who may find starting a traditional chainsaw challenging.

Safety is a top priority with the Husqvarna 1151338-95. It comes with a chain brake, which instantly stops the chain in the event of kickback, providing peace of mind to the user. The chainsaw also features a built-in low-vibration system that absorbs shocks and reduces overall vibration levels, allowing for safer and more comfortable operation.

Another notable characteristic of the Husqvarna 1151338-95 is its ergonomic design. The lightweight frame and well-placed handles provide excellent balance, making it easy to maneuver and operate for extended periods. The accessible air filter and easy-to-access oil tank also allow for convenient maintenance, ensuring that the chainsaw remains in optimal working condition.

The Husqvarna 1151338-95 is not just about raw power; it is a thoughtful combination of technology, comfort, and safety features, making it an excellent choice for anyone looking to tackle tasks around the home or in professional settings. With its advanced technologies and user-centric design, this chainsaw stands out as a reliable tool for cutting and pruning needs.
Top Page Image Contents