Felling cut

WORKING TECHNIQUES

Next make the bottom cut so that it ﬁnishes exactly at the end of the top cut.

The directional cuts should run 1/4 of the diameter through the trunk and the angle between the top cut and bottom cut should be 45°.

The line where the two cuts meet is called the directional cut line. This line should be perfectly horizontal and at right angles (90°) to the chosen felling direction.

The felling cut is made from the opposite side of the tree and it must be perfectly horizontal. Stand on the left side of the tree and cut on the pull stroke.

Make the felling cut about 1.5-2 inches (3-5 cm) above the bottom directional cut.

Finish the felling cut parallel with the directional cut line so that the distance between them is at least 1/10 of the trunk diameter. The uncut section of the trunk is called the felling hinge.

The felling hinge controls the direction that the tree falls in.

All control over the felling direction is lost if the felling hinge is too narrow or non-existent, or if the directional cuts and felling cut are badly placed.

When the felling cut and directional cut are complete the tree should start to fall by itself or with the aid of a felling wedge or breaking bar.

We recommend that you use a bar that is longer than the diameter of the tree, so that you can make the felling cut and directional cuts with single cutting strokes. See instructions under the heading Technical data section to ﬁnd out which lengths of bar are recommended for your saw.

There are methods for felling trees with a diameter larger than the bar length. However these methods involve a much greater risk that the kickback zone of the bar will come into contact with the tree.

English – 27

1151338-95 specifications

The Husqvarna 1151338-95 is an innovative chainsaw that exemplifies the blend of power, performance, and user-friendly features, making it a popular choice among both amateur woodworkers and professional landscapers. Designed with a 14-inch cutting bar, this chainsaw is ideal for pruning, trimming, and cutting small to medium-sized trees, providing the versatility needed for various tasks.

One of the main features of the Husqvarna 1151338-95 is its powerful X-Torq engine. This engine is designed to deliver maximum power while minimizing fuel consumption and emissions, making it environmentally friendly. The X-Torq technology ensures that users experience less vibration while operating the chainsaw, reducing fatigue during prolonged use. This feature enhances overall comfort and allows for more precise control.

In addition to its eco-friendly engine, the Husqvarna 1151338-95 is equipped with Smart Start technology, which facilitates easy starting with minimal effort. The fuel pump and choke are designed to work in harmony, enabling the user to start the saw quickly, even in cold conditions. This is particularly beneficial for those who may find starting a traditional chainsaw challenging.

Safety is a top priority with the Husqvarna 1151338-95. It comes with a chain brake, which instantly stops the chain in the event of kickback, providing peace of mind to the user. The chainsaw also features a built-in low-vibration system that absorbs shocks and reduces overall vibration levels, allowing for safer and more comfortable operation.

Another notable characteristic of the Husqvarna 1151338-95 is its ergonomic design. The lightweight frame and well-placed handles provide excellent balance, making it easy to maneuver and operate for extended periods. The accessible air filter and easy-to-access oil tank also allow for convenient maintenance, ensuring that the chainsaw remains in optimal working condition.

The Husqvarna 1151338-95 is not just about raw power; it is a thoughtful combination of technology, comfort, and safety features, making it an excellent choice for anyone looking to tackle tasks around the home or in professional settings. With its advanced technologies and user-centric design, this chainsaw stands out as a reliable tool for cutting and pruning needs.