Husqvarna 1151338-95 manual Working Techniques, Before use, General working instructions

Page 22

WORKING TECHNIQUES

Before use:

,

1Check that the chain brake works correctly and is not damaged.

2Check that the rear right hand guard is not damaged.

3Check that the throttle lockout works correctly and is not damaged.

4Check that the stop switch works correctly and is not damaged.

5Check that all handles are free from oil.

6Check that the anti vibration system works and is not damaged.

7Check that the muffler is securely attached and not damaged.

8Check that all parts of the chain saw are tightened correctly and that they are not damaged or missing.

9Check that the chain catcher is in place and not damaged.

10Check the chain tension.

General working instructions

IMPORTANT!

This section describes basic safety rules for using a chain saw. This information is never a substitute for professional skills and experience. If you get into a situation where you feel unsafe, stop and seek expert advice. Contact your chain saw dealer, service agent or an experienced chain saw user. Do not attempt any task that you are not sure you can handle!

Before using a chain saw you must understand the effects of kickback and how to avoid them. See instructions under the heading How to avoid kickback.

Before using a chain saw you must understand the difference between cutting with the top and bottom edges of the bar. See instructions under the headings How to avoid kickback and Machine’s safety equipment.

Wear personal protective equipment. See instructions under the heading Personal protective equipment.

22 – English

Basic safety rules

1 Look around you:

•To ensure that people, animals or other things cannot affect your control of the machine.

•To make sure that none of the above might come within reach of your saw or be injured by falling trees.

CAUTION! Follow the instructions above, but do not use a chain saw in a situation where you cannot call for help in case of an accident.

2Do not use the machine in bad weather, such as dense fog, heavy rain, strong wind, intense cold, etc. Working in bad weather is tiring and often brings added risks, such as icy ground, unpredictable felling direction, etc.

3Take great care when removing small branches and avoid cutting bushes (i.e. cutting many small branches at the same time). Small branches can be grabbed by the chain and thrown back at you, causing serious injury.

4Make sure you can move and stand safely. Check the area around you for possible obstacles (roots, rocks, branches, ditches, etc.) in case you have to move suddenly. Take great care when working on sloping ground.

5Take great care when cutting a tree that is under tension. A tree that is under tension may spring back to its normal position before or after being cut. If you position yourself incorrectly or make the cut in the wrong place the tree may hit you or the machine and cause you to lose control. Both situations can cause serious personal injury.

Page 21 Page 23
Image 22
Page 21 Page 23
Contents 395XP Symbols in the operator’s manual KEY to SymbolsSymbols on the machine You will find the following labels on your chain sawEPA Contents Introduction Dear customerWhat is WHAT? What is what on the chain saw?General Safety Precautions Before using a new chain sawPersonal protective equipment Machine′s safety equipmentAlways use common sense Chain brake and front hand guardGeneral Safety Precautions Chain catcher Throttle lockoutRight hand guard Vibration damping system Stop switchCutting equipment MufflerBar Cutting equipment designed to reduce kickbackChain Sharpening your chain and adjusting depth gauge setting General information on sharpening cutting teethTensioning the chain Lubricating cutting equipment Needle bearing lubrication Chain drive sprocketChecking wear on cutting equipment Fitting the bar and chain AssemblyWorking with the chain Fuel Handling FuelTransport and storage Fuel safetyFueling Long-term storageCold engine Starting and StoppingStarting and stopping Warm engineStopping Before use Basic safety rulesWorking Techniques General working instructionsGeneral rules Basic cutting technique TermsTree felling technique Clearing the trunk and preparing your retreat Felling directionDirectional cuts Felling cut What is kickback? How to avoid kickbackFreeing a tree that has fallen badly Cutting the trunk into logs Maintenance Carburetor adjustmentCorrectly adjusted carburetor Fine adjustment of the idling speed THigh speed jet H Checking the inertia brake release ImmediatelyMuffler Tensioning the recoil spring Changing a broken or worn starter cordChanging a broken recoil spring Lubricating the bar tip sprocket Air filterSpark plug Fitting the starterWhen making adjustments Adjustment of the oil pumpAir Injection centrifugal cleaning Needle bearing lubricationWinter use Heated handlesMaintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical data058/1,5 mm Saw chain filing and file gauges050/1,3 mm 063/1,6 mmFederal Emission Control Warranty Statement Your Warranty Rights and ObligationsOther safety precautions American Standard Safety PrecautionsSafety precautions for chain saw Kickback safety precautionsPage 1151338-95

1151338-95 specifications

The Husqvarna 1151338-95 is an innovative chainsaw that exemplifies the blend of power, performance, and user-friendly features, making it a popular choice among both amateur woodworkers and professional landscapers. Designed with a 14-inch cutting bar, this chainsaw is ideal for pruning, trimming, and cutting small to medium-sized trees, providing the versatility needed for various tasks.

One of the main features of the Husqvarna 1151338-95 is its powerful X-Torq engine. This engine is designed to deliver maximum power while minimizing fuel consumption and emissions, making it environmentally friendly. The X-Torq technology ensures that users experience less vibration while operating the chainsaw, reducing fatigue during prolonged use. This feature enhances overall comfort and allows for more precise control.

In addition to its eco-friendly engine, the Husqvarna 1151338-95 is equipped with Smart Start technology, which facilitates easy starting with minimal effort. The fuel pump and choke are designed to work in harmony, enabling the user to start the saw quickly, even in cold conditions. This is particularly beneficial for those who may find starting a traditional chainsaw challenging.

Safety is a top priority with the Husqvarna 1151338-95. It comes with a chain brake, which instantly stops the chain in the event of kickback, providing peace of mind to the user. The chainsaw also features a built-in low-vibration system that absorbs shocks and reduces overall vibration levels, allowing for safer and more comfortable operation.

Another notable characteristic of the Husqvarna 1151338-95 is its ergonomic design. The lightweight frame and well-placed handles provide excellent balance, making it easy to maneuver and operate for extended periods. The accessible air filter and easy-to-access oil tank also allow for convenient maintenance, ensuring that the chainsaw remains in optimal working condition.

The Husqvarna 1151338-95 is not just about raw power; it is a thoughtful combination of technology, comfort, and safety features, making it an excellent choice for anyone looking to tackle tasks around the home or in professional settings. With its advanced technologies and user-centric design, this chainsaw stands out as a reliable tool for cutting and pruning needs.
Top Page Image Contents