Hustler Turf 3700, 3500 owner manual Brake linkage Front clevis Jam nut

4.The 'F' dimension should be between 0.075" and 0.175" (1.9 mm - 4.4 mm) less than 'R' dimension.

5.If the toe-in must be re-adjusted to meet the dimensional requirements, loosen the jam nuts on either end of the tie rod. Figure 4-38

6.Once the jam nuts are both loose and backed off, rotate the tie rod in the appropriate direction and adjust accordingly to meet the dimensional requirements of step #4.

7.Tighten the jam nuts on either end of the tie rod. Make sure the ball joints on each end move freely once jam nuts are tightened.

Brake linkage

Front clevis
	Jam nut
	Figure 4-36
Front of	‘F’ Dimension
	Adjustable tie-rod
tractor

‘R’ Dimension

F = R in.(mm) - 0.125 in. (3.175 mm)

Figure 4-37

Tie rod

Jam nut

Figure 4-38

109627_0910 4-15