Husqvarna SG13/968999353, SG13A, SG13 manual Movement/Transport, Storage, Children

Page 11

SAFETY INSTRUCTIONS

Movement/Transport

To turn and steer the machine, press down on the handle and turn on the back wheels.

Turn off the engine and allow it to cool at least 2 minutes before transport.

Collapse the handle if the machine is equipped with a collapsible handle.

Be careful and use safe lifting and moving techniques when loading/unloading the machine.

We recommend having two people to lift the machine.

Activate the parking brake during transport.

Fasten the machine properly in place with approved fasteners, such as tension belts, chains or rope. Always check that you are in compliance with applicable traffic regulations before transporting the machine.

Storage

Allow the engine to cool before storing the machine. Never store the machine near a open flame.

Store the machine with the fuel valve closed.

Store the machine and fuel in such a way that there is no risk that leaking fuel or fumes can come in contact with flames or sparks from electrical machines, electric engines, relays, switches, boilers or similar.

Store the machine in a locked space away from children and adults untrained in use of the machine.

Children

Serious accidents can occur if you fail to be on guard for children in the vicinity of the machine. Never assume that children will stay put where you last saw them.

Keep children away from the machine.

Keep children away from the work area and under close supervision by another adult.

Keep an eye out and shut off the machine if children enter the work area.

Never allow children to operate the machine.

Be particularly careful near corners, bushes, trees or other objects that block your view.

8011-278chg

We recommend having two people lift the machine.

8011-207chg

Keep children away from the machine.

8011-206chg

Never allow children to operate the machine.

11

Image 11
Contents Manual no REV 12/01/05 Operator’s Manual ModelsHusqvarna All Rights Reserved Printed Beatrice, Nebraska Table of Contents Introduction Decals and machine-bound instructions Symbols and DecalsDecal Location of decals Translation of instructionsDecal Important information General use Safety Instructions Safety Instructions Preparations Operating Children Movement/TransportStorage Fuel system Maintenance Personal equipment Protective EquipmentEquipment set-up SET-UPHair PIN Engine Throttle Control Lever Throttle Cable Main components and operating controls ControlsPresentation 12 11 EngineThrottle Choke control StarterStarter handle Fuel valveOil drainage Spark plugMuffler Oil dipstickDead man’s grip bar Fuel tankFueling Centrifugal clutchNever operate a machine with a defective brake On/Off Engine switch on the panelAdjustment bar for the handle BrakeStarting the engine OperationStarter handle Engine switch on the handleDead man’s grip bar Brake Engine switchNormal shutdown Shutdown in emergency situationsBefore you start Using your stump grinder 8011-202chg Transport Shut off the machine when you are doneOperating on hills Maintenance schedule MaintenanceCleaning the cyclone filter Replacing the air filter Idle adjustment Cleaning the sludge reservoirFitting the wrong spark plug type can damage the engine Ignition systemAdjusting the drive belt Disassembling and reassembling the blade, pockets and teeth Removing and refitting the wheels Two minute rule Adjusting the brakeCleaning and washing Lubrication Checking the engine’s oil level Engine oilThrottle cable Right wheelSymptom Cause Action TroubleshootingProblem Possible solutions Winter storage ServiceStorage Model Technical DataWiring Diagram Delivery service Service JournalService Journal