Husqvarna SG13/968999353, SG13A, SG13 manual Maintenance schedule

MAINTENANCE

Maintenance schedule

The following is a list of maintenance procedures that MUST be performed on the machine. For those points not described in this manual, visit an authorized service workshop.

Maintenance	Daily	-/10	1/25	3/50	6/100	12/300
Check the engine oil level	X
Change engine oil 1)
Check the air filter	X
Clean the air filter 2)				X
Replace air filter cartridge 2)						X
Clean sludge reservoir for fuel system					X
Check and clean the spark plug					X
Replace the spark plug						X
Check engine switch function 3)	X
Check idle speed						X
Check and adjust play in valves 4)						X
Clean fuel tank 4)						X
Check, replace fuel lines as necessary 4, 5)						X
Check throttle and cable 3)	X
Check blade and cutter 3)	X
Check decals and warning signs 3)	X
Check wear and tension on the belts 3)	X
Check the chassis, bolts and set screws		X
Grease the blade bearings (use high tempera-	X
ture grease such as Mobilith SHC 220 or equal)6)
Grease the wheels (standard lithium base)				X
Check tire air pressure (25 psi max)	X

1)First change after 20 hours. 2)In dusty conditions maintenance is required at shorter intervals.

3)Before each use. 4)Performed by authorized service workshop. 5)Performed every second year.

6)Grease every 4 hours.

WARNING!

No service operations may be performed on the engine or unit unless:

•The engine is stopped.

•The ignition cable has been removed from the spark plug.

•The machine is securely parked where it will not tip or begin rolling.

31