Husqvarna 53 5RJ manual KEY to Symbols

Page 2

KEY TO SYMBOLS

Symbols

WARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

A protective helmet where there is a risk of falling objects

• Approved hearing protection

• Approved eye protection

Max. speed of output shaft, rpm

This product is in accordance with applicable EC directives.

Watch out for thrown objects and ricochets.

The operator of the machine must

 

 

ensure, while working, that no

 

 

persons or animals come closer than

15 m

15 m

15 metres.

50FT

50FT

Machines fitted with saw blades or

grass blades can be thrown violently

to the side when the blade comes into contact with a fixed object. The blade is capable of amputating an arm or leg. Always keep people and

animals at least 15 metres from the machine.

Arrows which show limits for handle positioning.

Always wear approved protective gloves.

Wear sturdy, non-slip boots.

Only use non-metallic, flexible cutting attachments, i.e. trimmer heads with trimmer cord.

Noise emission to the environment according to the European Community’s Directive. The machine’s emission is specified in chapter Technical data and on label.

Starting instructions

1.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.

 

 

 

 

 

 

 

 

 

 

 

 

 

4.

 

 

 

 

 

Other symbols/decals on the machine refer to special certification requirements for certain markets.

The engine is switched off by moving the stop switch to the stop position. CAUTION! The stop switch

automatically returns to the start position. In order to prevent unintentional starting, the spark plug

cap must be removed from the spark plug when assembling, checking and/or performing maintenance.

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

Approved eye protection must always be used.

2 – English

Image 2
Contents 535RJ KEY to Symbols SymbolsContents Introduction Dear CustomerWhat is WHAT? What is what on the brush cutter?General Safety Precautions Personal protective equipmentMachine′s safety equipment Throttle lockoutVibration damping system Stop switchCutting attachment guard MufflerLocking nut Sharpening grass cutters and grass blades Cutting equipmentCutting equipment Trimmer head Assembling the cutting equipment AssemblyFitting the J-handle Fitting the guard extensionFitting a blade guard, grass blade and grass cutter Fitting other guards and cutting attachmentsAssembly Fuel Fuel safetyFuel Handling Fuelling MixingStarting and stopping Starting and StoppingCheck before starting StartingStopping General working instructions Basic safety rulesWorking Techniques Grass trimming with a trimmer head Grass clearing using a grass bladeBasic working techniques TrimmingCutting SweepingMuffler MaintenanceCarburettor Air filter Cooling systemBevel gear Oiling the air filter Cleaning the air filterSpark plug Maintenance Maintenance schedule Maintenance Daily Weekly MonthlyTechnical data Approved accessories Type Cutting attachment guard, Art. no EC-declaration of conformity Applies to Europe onlyPage S35 2,7mm 095-.106 25 m 15 cm T35, T35x T45, T45x Page Page Original instructions 1154107-26