Husqvarna 53 5RJ manual Maintenance

Page 25

MAINTENANCE

If the machine is low on power, difﬁcult to start or runs poorly at idle speed: always check the spark plug ﬁrst before taking any further action. If the spark plug is dirty, clean it and check that the electrode gap is 0.5 mm. The spark plug should be replaced after about a month in operation or earlier if necessary.

CAUTION! Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder. Check that the spark plug is ﬁtted with a suppressor.

English – 25

Image 25

Contents 535RJ Symbols KEY to SymbolsContents Dear Customer IntroductionWhat is what on the brush cutter? What is WHAT?Personal protective equipment General Safety PrecautionsThrottle lockout Machine′s safety equipmentCutting attachment guard Stop switchVibration damping system MufﬂerLocking nut Cutting equipment Cutting equipmentSharpening grass cutters and grass blades Trimmer head Fitting the J-handle AssemblyAssembling the cutting equipment Fitting the guard extensionFitting other guards and cutting attachments Fitting a blade guard, grass blade and grass cutterAssembly Fuel Handling Fuel safetyFuel Mixing FuellingCheck before starting Starting and StoppingStarting and stopping StartingStopping Working Techniques Basic safety rulesGeneral working instructions Basic working techniques Grass clearing using a grass bladeGrass trimming with a trimmer head TrimmingSweeping CuttingCarburettor MaintenanceMufﬂer Bevel gear Cooling systemAir ﬁlter Spark plug Cleaning the air ﬁlterOiling the air ﬁlter Maintenance Maintenance Daily Weekly Monthly Maintenance scheduleTechnical data EC-declaration of conformity Applies to Europe only Approved accessories Type Cutting attachment guard, Art. noPage S35 2,7mm 095-.106 25 m 15 cm T35, T35x T45, T45x Page Page Original instructions 1154107-26