Husqvarna 53 5RJ manual Stop switch, Cutting attachment guard, Vibration damping system, Muffler

Page 8

GENERAL SAFETY PRECAUTIONS

be checked. See instructions under the heading Maintenance.

Stop switch

Use the stop switch to switch off the engine.

Start the engine and make sure the engine stops when you move the stop switch to the stop setting.

Cutting attachment guard

This guard is intended to prevent loose objects from being thrown towards the operator. The guard also protects the operator from accidental contact with the cutting attachment.

Check that the guard is undamaged and not cracked. Replace the guard if it has been exposed to impact or is cracked.

Always use the recommended guard for the cutting attachment you are using. See chapter on Technical data.

WARNING! Never use a cutting

! attachment without an approved guard. See the chapter on Technical data. If an incorrect or faulty guard is fitted this can cause serious personal injury.

Vibration damping system

Your machine is equipped with a vibration damping system that is designed to minimize vibration and make operation easier.

Using incorrectly wound cord or a blunt or incorrect cutting attachment (wrong type or incorrectly filed, see instructions under the heading Filing the blade) increases the level of vibration.

The machines vibration damping system reduces the transfer of vibration between the engine unit/cutting equipment and the machines handle unit.

Regularly check the vibration damping units for cracks or deformation.

Check that the vibration damping element is undamaged and securely attached.

WARNING! Overexposure to vibration

! can lead to circulatory damage or nerve damage in people who have impaired circulation. Contact your doctor if you experience symptoms of overexposure to vibration. Such symptoms include numbness, loss of feeling, tingling, pricking, pain, loss of strength, changes in skin colour or condition. These symptoms normally appear in the fingers, hands or wrists. The risk increases at low temperatures.

Muffler

The muffler is designed to keep noise levels to a minimum and to direct exhaust fumes away from the user. A muffler

8 – English

Image 8
Contents 535RJ KEY to Symbols SymbolsContents Introduction Dear CustomerWhat is WHAT? What is what on the brush cutter?General Safety Precautions Personal protective equipmentMachine′s safety equipment Throttle lockoutStop switch Cutting attachment guardVibration damping system MufflerLocking nut Sharpening grass cutters and grass blades Cutting equipmentCutting equipment Trimmer head Assembly Fitting the J-handleAssembling the cutting equipment Fitting the guard extensionFitting a blade guard, grass blade and grass cutter Fitting other guards and cutting attachmentsAssembly Fuel Fuel safetyFuel Handling Fuelling MixingStarting and Stopping Check before startingStarting and stopping StartingStopping General working instructions Basic safety rulesWorking Techniques Grass clearing using a grass blade Basic working techniquesGrass trimming with a trimmer head TrimmingCutting SweepingMuffler MaintenanceCarburettor Air filter Cooling systemBevel gear Oiling the air filter Cleaning the air filterSpark plug Maintenance Maintenance schedule Maintenance Daily Weekly MonthlyTechnical data Approved accessories Type Cutting attachment guard, Art. no EC-declaration of conformity Applies to Europe onlyPage S35 2,7mm 095-.106 25 m 15 cm T35, T35x T45, T45x Page Page Original instructions 1154107-26