Univex 2348LS III. Children, IV. Towing, Safe Handling of Gasoline, General Service

Page 3

SAFETY RULES

Safe Operation Practices for Ride-On Mowers

III. CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them.

Keep children out of the mowing area and in the watchful care of a responsible adult other than the operator.

Be alert and turn machine off if a child enters the area.

Before and while backing, look behind and down for small children.

Never carry children, even with the blades shut off. They may fall off and be seriously injured or interfere with safe machine operation. Children who have been given rides in the past may suddenly appear in the mowing area for another ride and be run over or backed over by the machine.

Never allow children to operate the machine.

Use extra care when approaching blind corners, shrubs, trees, or other objects that may block your view of a child.

IV. TOWING

Tow only with a machine that has a hitch designed for towing. Do not attach towed equipment except at the hitch point.

Follow the manufacturer's recommendation for weight limits for towed equipment and towing on slopes.

Never allow children or others in or on towed equip- ment.

On slopes, the weight of the towed equipment may cause loss of traction and loss of control.

Travel slowly and allow extra distance to stop.

V. SERVICE

SAFE HANDLING OF GASOLINE

To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive.

Extinguish all cigarettes, cigars, pipes, and other sources of ignition.

Use only approved gasoline container.

Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling.

Never fuel the machine indoors.

Never store the machine or fuel container where there is an open flame, spark, or pilot light such as on a water heater or other appliances.

Never fill containers inside a vehicle or on a truck or trailer bed with plastic liner. Always place containers on the ground away from your vehicle when filling.

Remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment with a portable container, rather than from a gasoline dispenser nozzle.

Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

If fuel is spilled on clothing, change clothing immedi- ately.

Never overfill fuel tank. Replace gas cap and tighten securely.

GENERAL SERVICE

Never operate machine in a closed area.

Keep all nuts and bolts tight to be sure the equipment is in safe working condition.

Never tamper with safety devices. Check their proper operation regularly.

Keep machine free of grass, leaves, or other debris build-up. Clean oil or fuel spillage and remove any fuel-soaked debris. Allow machine to cool before storing.

If you strike a foreign object, stop and inspect the machine. Repair, if necessary, before restarting.

Never make any adjustments or repairs with the engine running.

Check grass catcher components and the discharge guard frequently and replace with manufacturer's rec- ommended parts, when necessary.

Mower blades are sharp. Wrap the blade or wear gloves, and use extra caution when servicing them.

Check brake operation frequently. Adjust and service as required.

Maintain or replace safety and instruction labels, as necessary.

Be sure the area is clear of bystanders before operat- ing. Stop machine if anyone enters the area.

Never carry passengers.

Do not mow in reverse unless absolutely necessary. Always look down and behind before and while back- ing.

Never carry children, even with the blades shut off. They may fall off and be seriously injured or interfere with safe machine operation. Children who have been given rides in the past may suddenly appear in the mowing area for another ride and be run over or backed over by the machine.

Keep children out of the mowing area and in the watchful care of a responsible adult other than the operator.

Be alert and turn machine off if a child enters the area.

Before and while backing, look behind and down for small children.

Mow up and down slopes (15° Max), not across.

Choose a low ground speed so that you will not have to stop or shift while on the slope.

Avoid starting, stopping, or turning on a slope. If the tires lose traction, disengage the blades and proceed slowly straight down the slope.

If machine stops while going uphill, disengage blades, shift into reverse and back down slowly.

Do not turn on slopes unless necessary, and then, turn slowly and gradually downhill, if possible.

3

Image 3
Contents 2348LS II. Slope Operation Safety RulesSafe Operation Practices for Ride-On Mowers General OperationIV. Towing ServiceGeneral Service III. ChildrenTable of Contents Unpack Carton AssemblyUnassembled Parts To Remove Tractor from CartonCheck Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor To USE Throttle Control D See HOW to USE Your TractorTo SET Parking BRAKESee a Stopping See bTo Move Forward and Backward See Fig To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig System CharacteristicsTo Operate on Hills Using the Reverse Operation SystemTo Operate Mower See Fig Reverse Operation System ROSADD Gasoline Service REMINDER/HOUR MeterBefore Starting the Engine Check Engine OIL LevelPurge Transmission Mowing TipsLubrication Chart MaintenanceBlade Care TractorBrake Operation TiresEngine Cleaning Service and Adjustments To Install Mower See FigsTo Remove Mower See Fig First Install ANTI-SWAY BAR S Engage belt tension rod K on locking bracket L To Level Mower Mower Drive Belt Installation To Replace Mower Blade Drive BeltMower Drive Belt Removal Belt Installation To Replace Motion Drive Belt See FigBelt Removal To Remove Wheel for Repairs See Fig To Start Engine with a Weak Battery See FigTo Check Brake Front Wheel TOE-IN/CAMBERTo Replace Headlight Bulb To Adjust Throttle Control CableTo Adjust Choke Control To Adjust CarburetorEngine OIL StorageOther Fuel SystemProblem Cause Correction Troubleshooting PointsEngine dies when SCH12 SchematicElectrical KEY Part Description Chassis Chassis Drive Nut U-CHNL 1/4-20 550DP .350 PNL Engine Spark Arrester KITEngine Power Rating Information Steering Assembly 532 41 Wheel, Steering 532 19 532 40 Seat Seat AssemblyWheels and Tires DecalsMower Deck 532 41 87-00 Deck Weldment Mower Mower Lift Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationService Notes Service Notes 532 41 84-82 Rev 09.11.08 SBW

2348LS, 96043004400 specifications

The Univex 96043004400,2348LS is an advanced piece of equipment designed to meet the demands of modern food processing and preparation. This versatile machine is recognized in the industry for its reliability and efficiency, making it an essential tool for restaurants, catering businesses, and food manufacturing facilities.

One of the standout features of the Univex 96043004400,2348LS is its powerful motor. With robust horsepower, it provides exceptional mixing capabilities, allowing for the preparation of large batches of ingredients with ease. This power is complemented by a range of speed settings, delivering customizable performance to suit various mixing requirements, whether it’s dough, batters, or other food preparations.

The design of the Univex 96043004400,2348LS highlights both functionality and user-friendliness. The machine is equipped with a large capacity bowl, enabling users to handle significant quantities of ingredients efficiently. The stainless steel construction of the bowl and other components not only ensures durability but also makes cleaning and maintenance straightforward, which is crucial for maintaining hygiene standards in food preparation environments.

One of the key technologies integrated into the Univex 96043004400,2348LS is its planetary mixing system. This technology ensures that every ingredient is evenly mixed, eliminating the risk of unmixed portions, resulting in consistent quality across batches. The machine also offers various attachments, such as whisk and dough hooks, enhancing its versatility for different types of tasks.

Safety features are an important consideration in the design of the Univex 96043004400,2348LS. The machine comes equipped with a safety guard that prevents access to the mixing area while the machine is in operation, minimizing the risk of accidents. Additionally, the machine's sturdy base and design ensure stability during use, further enhancing safety.

In conclusion, the Univex 96043004400,2348LS is a robust and versatile mixing machine that stands out for its powerful motor, durable design, and advanced mixing technology. Its wide range of speed settings and attachments makes it suitable for various culinary tasks, while its safety features ensure a secure working environment. This machine is an investment in efficiency and quality for any food processing operation.