Ryobi Outdoor CS30 RY30020B, SS30 RY30040B, BC30 RY30060B manual Attaching the Grass Deflector

Page 12

ASSEMBLY

ATTACHING THE GRASS DEFLECTOR

WARNING:

The line cutting blade on the grass deflector is sharp. Avoid contact with the blade. Failure to avoid contact can result in serious personal injury.

TO ATTACH THE CURVED SHAFT GRASS DEFLECTOR - CS30

See Figure 6.

nPress the grass deflector onto the bottom of the curved shaft as shown.

nInsert the hex screw through the grass deflector and the bracket on the curved shaft.

nPlace the flat washer and lock washer on the hex head cap screw.

nPlace the wing nut on the hex head cap screw and tighten securely.

TO ATTACH THE STRAIGHT SHAFT GRASS DEFLECTOR - SS30

See Figure 7.

n Remove the slotted hex head screw from the grass deflector.

nInsert the tab on the mounting bracket in the slot on the grass deflector.

nAlign the screw hole in the mounting bracket with the screw hole in the grass deflector.

nInsert the slotted hex head screw through the mounting bracket and into the grass deflector.

nTighten the screw securely.

ATTACHING THE BRUSHCUTTER GUARD - BC30

See Figure 8.

The guard is shipped installed on these brushcutter models. Instructions have been included for reference when changing from string trimmer operation back to brushcutter operation.

nWith the string head removed, place the brushcutter guard on the gear head as shown.

nInstall the three screws from bottom through the guard and into the gear head.

nTighten the screws securely and torque to 40-50 in.lb. minimum.

HEX

SCREWGRASS DEFLECTOR

BRACKET

 

LOCK

 

WASHER

FLAT

 

WASHER

WING NUT

 

Fig. 6

 

HEX HEAD

 

SCREW

STRAIGHT

SHAFT GRASSTAB

DEFLECTOR

SLOT

Fig. 7

GEAR

BRUSHCUTTER GUARD

HEAD

 

HEX HEAD

SCREW

Fig. 8

Page 12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Read ALL InstructionsSpecific Safety Rules Specific Safety Rules for Trimmer USESpecific Safety Rules for BRUSH- Cutter and Blade USE Symbols Symbol Name ExplanationService Features Starter Grip RopeTrigger Lock Primer Knob Straight Shaft Grass DeflectorAssembly Installing the Power Head to the Attachment Removing the Attachment from the Power HeadAttaching the Storage Hanger See FigureAttaching the Front Handle CS30 and SS30 Attaching the J Handle BC30Attaching the Grass Deflector To Attach the Curved Shaft Grass Deflector CS30To Attach the Straight Shaft Grass Deflector SS30 Attaching the Brushcutter Guard BC30Attaching the Shoulder Harness BC30 Converting from Brushcutter to String Trimmer BC30Removing the TRI-ARCBLADE and Brushcutter Guard Converting from String Trimmer to Brushcutter BC30Installing the TRI-ARCBLADE and Brushcutter Guard OperationRemoving the Straight Shaft Grass Deflector and String Head Fueling and Refueling the Trimmer Operating the TrimmerTo Advance the Cutting Line To Advance the Cutting Line ManuallyCutting Tips Grass Deflector Line Trimming CUT-OFF BladeOperating the Brushcutter Blade ThrustTRI-ARCBLADE Cutting Technique BladeStarting and Stopping See Figures 21Maintenance General MaintenanceSpool Replacement See Figures 24String Replacement See Figures 26Arrows on Spool Anchor Hole First String SlotCleaning the Exhaust Port and Muffler Spark Arrestor Replacing and Cleaning AIR FilterFuel CAP Spark PlugTroubleshooting Speed. See FigureIdle Speed Screw Warranty This Product WAS Manufactured with a Catalyst MufflerLimited Warranty Statement MANUFACTURER’S Warranty Coverage OWNER’S Warranty ResponsibilitiesMaintenance Requirements CoverageService
Top Page Image Contents