Ryobi Outdoor CS30 RY30020B, SS30 RY30040B, BC30 RY30060B manual General Safety Rules

Page 3

GENERAL SAFETY RULES

WARNING:

Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.

READ ALL INSTRUCTIONS

nFor safe operation, read and understand all instructions before using this product. Follow all safety instructions. Failure to follow all safety instructions listed below, can result in serious personal injury.

nDo not allow children or untrained individuals to use this unit.

nNever start or run the engine in a closed or poorly venti- lated area; breathing exhaust fumes can kill.

nClear the work area before each use. Remove all objects such as rocks, broken glass, nails, wire, or string which can be thrown or become entangled in the cutting line or blade.

nWear safety glasses or goggles that are marked to comply with ANSI Z87.1 standard when operating this product.

nWear heavy, long pants, boots, and gloves. Do not wear loose fitting clothing, short pants, or go barefoot. Do not wear jewelry of any kind.

nProduct users on United States Forest Service land, and in some states, must comply with fire prevention regulations. This product is equipped with a spark arrestor; however, other user requirements may apply. Check with your federal, state, or local authorities.

nNever operate this unit on the operator’s left side.

�n Secure long hair above shoulder level to prevent entanglement in moving parts.

�n Keep all bystanders, children, and pets at least 15 m (50 ft.) away.

�n Do not operate this unit when you are tired, ill, or under the influence of alcohol, drugs, or medication.

�n Do not operate in poor lighting.

�n Keep firm footing and balance. Do not overreach. Overreaching can result in loss of balance or exposure to hot surfaces.

�n Keep all parts of your body away from any moving part.

�n To avoid hot surfaces, never operate the unit with the bottom of the engine above waist level.

�n Do not touch area around the muffler or cylinder of the unit, these parts get hot from operation.

nAlways stop the engine and remove the spark plug wire before making any adjustments or repairs except for carburetor adjustments.

nInspect the unit before each use for loose fasteners, fuel leaks, etc. Replace any damaged parts before use.

nThe string head or blade will rotate during carburetor adjustments.

nIt has been reported that vibrations from hand-held tools may contribute to a condition called Raynaud’s Syndrome in certain individuals. Symptoms may include tingling, numbness, and blanching of the fingers, usually apparent upon exposure to cold. Hereditary factors, exposure to cold and dampness, diet, smoking, and work practices are all thought to contribute to the development of these symptoms. It is presently unknown what, if any, vibrations or extent of exposure may contribute to the condition. There are measures that can be taken by the operator to possibly reduce the effects of vibration:

a)Keep your body warm in cold weather. When oper- ating the unit wear gloves to keep hands and wrists warm. It is reported that cold weather is a major factor contributing to Raynaud’s Syndrome.

b)After each period of operation, exercise to increase blood circulation.

c)Take frequent work breaks. Limit the amount of exposure per day.

d)Keep the tool well maintained, fasteners tightened, and worn parts replaced.

If you experience any of the symptoms of this condition, immediately discontinue use and see your physician about these symptoms.

nMix and store fuel in a container approved for gasoline.

�n Mix fuel outdoors where there are no sparks or flames. Wipe up any fuel spillage. Move 9 m (30 ft. ) away from refueling site before starting engine.

nStop the engine and allow to cool before refueling or storing the unit.

nAllow the engine to cool; empty the fuel tank and secure the unit from moving before transporting in a vehicle.

Page 3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsRead ALL Instructions General Safety RulesSpecific Safety Rules Specific Safety Rules for Trimmer USESpecific Safety Rules for BRUSH- Cutter and Blade USE Symbol Name Explanation SymbolsService Features Knob Straight Shaft Grass Deflector Starter GripRope Trigger Lock PrimerAssembly See Figure Installing the Power Head to the AttachmentRemoving the Attachment from the Power Head Attaching the Storage HangerAttaching the J Handle BC30 Attaching the Front Handle CS30 and SS30Attaching the Brushcutter Guard BC30 Attaching the Grass DeflectorTo Attach the Curved Shaft Grass Deflector CS30 To Attach the Straight Shaft Grass Deflector SS30Converting from String Trimmer to Brushcutter BC30 Attaching the Shoulder Harness BC30Converting from Brushcutter to String Trimmer BC30 Removing the TRI-ARCBLADE and Brushcutter GuardInstalling the TRI-ARCBLADE and Brushcutter Guard OperationRemoving the Straight Shaft Grass Deflector and String Head Operating the Trimmer Fueling and Refueling the TrimmerGrass Deflector Line Trimming CUT-OFF Blade To Advance the Cutting LineTo Advance the Cutting Line Manually Cutting TipsCutting Technique Blade Operating the BrushcutterBlade Thrust TRI-ARCBLADESee Figures 21 Starting and StoppingSee Figures 24 MaintenanceGeneral Maintenance Spool ReplacementFirst String Slot String ReplacementSee Figures 26 Arrows on Spool Anchor HoleSpark Plug Cleaning the Exhaust Port and Muffler Spark ArrestorReplacing and Cleaning AIR Filter Fuel CAPTroubleshooting Speed. See FigureIdle Speed Screw This Product WAS Manufactured with a Catalyst Muffler WarrantyLimited Warranty Statement Coverage MANUFACTURER’S Warranty CoverageOWNER’S Warranty Responsibilities Maintenance RequirementsService
Top Page Image Contents