Ryobi Outdoor CS30 RY30020B, SS30 RY30040B, BC30 RY30060B Starting and Stopping, See Figures 21

Page 18

OPERATION

STARTING AND STOPPING

See Figures 21 - 23.

TO START A COLD ENGINE:

DO NOT squeeze the throttle trigger until the engine starts and runs.

nLay the trimmer on a flat, bare surface.

nPRIME - Press the primer bulb 7 times.

nSET the start lever to the START position.

nPULL the rope until the engine starts.

nAllow the engine to run for 15 seconds.

nSqueeze trigger lock and throttle trigger.

NOTE: Squeezing the throttle trigger releases the start lever to the RUN position.

TO START A WARM ENGINE: PULL the rope until the engine starts.

TO STOP THE ENGINE:

Press and hold the switch in the stop “ ” position until the engine stops.

IGNITION

SWITCH

TRIGGER

LOCK

THROTTLE

TRIGGER

Fig. 21

IGNITION

SWITCH

PRIMER BULB

TRIGGER LOCK

THROTTLE TRIGGER

Fig. 22

START POSITION

START LEVER

RUN POSITION

START LEVER

Fig. 23

Page 18

Image 18

Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Read ALL InstructionsSpecific Safety Rules Specific Safety Rules for Trimmer USESpecific Safety Rules for BRUSH- Cutter and Blade USE Symbols Symbol Name ExplanationService Features Trigger Lock Primer Starter GripRope Knob Straight Shaft Grass DeflectorAssembly Attaching the Storage Hanger Installing the Power Head to the AttachmentRemoving the Attachment from the Power Head See FigureAttaching the Front Handle CS30 and SS30 Attaching the J Handle BC30To Attach the Straight Shaft Grass Deflector SS30 Attaching the Grass DeflectorTo Attach the Curved Shaft Grass Deflector CS30 Attaching the Brushcutter Guard BC30Removing the TRI-ARCBLADE and Brushcutter Guard Attaching the Shoulder Harness BC30Converting from Brushcutter to String Trimmer BC30 Converting from String Trimmer to Brushcutter BC30Installing the TRI-ARCBLADE and Brushcutter Guard OperationRemoving the Straight Shaft Grass Deflector and String Head Fueling and Refueling the Trimmer Operating the TrimmerCutting Tips To Advance the Cutting LineTo Advance the Cutting Line Manually Grass Deflector Line Trimming CUT-OFF BladeTRI-ARCBLADE Operating the BrushcutterBlade Thrust Cutting Technique BladeStarting and Stopping See Figures 21Spool Replacement MaintenanceGeneral Maintenance See Figures 24Arrows on Spool Anchor Hole String ReplacementSee Figures 26 First String SlotFuel CAP Cleaning the Exhaust Port and Muffler Spark ArrestorReplacing and Cleaning AIR Filter Spark PlugTroubleshooting Speed. See FigureIdle Speed Screw Warranty This Product WAS Manufactured with a Catalyst MufflerLimited Warranty Statement Maintenance Requirements MANUFACTURER’S Warranty CoverageOWNER’S Warranty Responsibilities CoverageService