OPERATION
!WARNING
READ THE SAFETY AND OPERATION PROCEDURES BEFORE USING THE PECO BRUSH BLAZER. DO NOT LET ANYONE OPERATE THE PECO BRUSH BLAZER IF THEY HAVE NOT READ AND ARE FAMILAIR WITH THE SAFETY AND OPERATION PROCEDURES. FAILURE TO DO SAY MAY RESULT IN SERIOUS INJURY OR DEATH.
The PECO Brush Blazer is equipped with an operator presence switch located on the left steering control handle. Your left hand must be on the left steering control handle at all times when operating the machine. Removing your left hand from the left steering control handle will engage the kill switch on the engine. This featured is designed and installed for your safety. Familiarize yourself with the controls and descriptions in the section below.
THROTTLE
CONTROL
LEFT STEERING CONTROL HANDLE AND OPERATOR PRESENCE SWITCH
1.PLACE YOUR LEFT HAND ON THE LEFT
STEERING CONTROL
HANDLE
2.PUSH THE THROTTLE CONTROL FORWARD
KEY SWITCH
RIGHT STEERING
CONTROL HANDLE
STARTING THE BRUSH BLAZER
3. TURN THE KEY
SWITCH TO THE
RUN POSITION AND
WAIT FOR THE FUEL
PUMP TO ENGAGE.
ONCE THE FUEL
PUMP IS ENGAGED,
TURN THE KEY TO
THE START POSITION
AND RELEASE
10