Pioneer Multi Player, CDJ-900 operating instructions Using the Slip button

Scratch play [VINYL]

When the jog mode is set to the VINYL mode, tracks can be played according to the direction and speed at which the jog dial is spun by spinning the top of the jog dial while pressing it.

1 Press [JOG MODE VINYL].

Set the jog mode to VINYL.

2 During playback, press the top of the jog dial.

Playback slows then stops.

3Spin the jog dial in the desired direction and at the desired speed.

The sound is played according to the direction and speed at which the jog dial is spun by spinning the top of the jog dial while pressing it.

4 Release your hand from the top of the jog dial.

Normal playback resumes.

Adjusting the speed at which playback slows then stops when the top of the jog dial is pressed and the speed at which playback returns to normal when the top of the jog dial is released.

Turn [VINYL SPEED ADJUST TOUCH/BRAKE].

The speed increases when turned clockwise, decreases when turned counterclockwise.

!When the jog mode set to the VINYL mode, the speed at which playback starts and stops when [PLAY/PAUSEf] is pressed changes simultaneously.

Using the [SLIP] button

When [SLIP] is set to on, normal playback with the original rhythm continues in the background during scratch play, loop play and reverse play. When scratch play, loop play or reverse play is canceled, normal playback resumes from the position playing in the background at that time.

Slip scratch play [VINYL]

1 Press [JOG MODE VINYL].

Set the jog mode to VINYL.

2 Press [SLIP].

The mode switches to the slip mode.

3 During playback, press the top of the jog dial.

The scratch play mode is set.

Normal playback continues in the background during scratch play. The SLIP indicator flashes in beat with the sound playing in the background. The position playing in the background is shown on the jog dial’s SLIP play display.

!The slip loop and slip reverse operations cannot be performed during slip scratch play.

4 Release your hand from the top of the jog dial.

Normal playback of the sound that was playing in the background resumes.

!To cancel the slip mode, press [SLIP] again.

Slip looping

1 Press [SLIP].

The mode switches to the slip mode.

2Press [LOOP IN/CUE (IN ADJUST)], then press [LOOP OUT (OUT ADJUST)].

Loop playback starts.

Normal playback continues in the background during looping. The SLIP indicator flashes in beat with the sound playing in the background. The position playing in the background is shown on the jog dial’s SLIP play display.

!Loops of over 8 seconds cannot be set.

3 Press [RELOOP/EXIT].

Looping is canceled, and normal playback of the sound that was playing in the background resumes.

!To cancel the slip mode, press [SLIP] again.

Auto beat slip looping

1	Press [SLIP].	English
The mode switches to the slip mode.
2	Press one of the [AUTO BEAT LOOP] buttons (1, 2, 4 or 8).

The loop is set automatically and loop playback begins.

Normal playback continues in the background during looping. The SLIP indicator flashes in beat with the sound playing in the background. The position playing in the background is shown on the jog dial’s SLIP play display.

3 Press [RELOOP/EXIT].

Normal playback of the sound that was playing in the background resumes.

!To cancel the slip mode, press [SLIP] again.

Slip reverse

1 Press [SLIP].

The mode switches to the slip mode.

2 During playback, press [REV].

The REV indicator lights and the track plays in the reverse direction.

Normal playback continues in the background during reverse playback. The SLIP indicator flashes in beat with the sound playing in the background. The position playing in the background is shown on the jog dial’s SLIP play display.

!Slip reverse play is automatically canceled after 8 beats have elapsed from the position at which [REV] was pressed. Normal playback of the sound that was playing in the background resumes.

!If [REV] is pressed again before 8 beats have elapsed, slip reverse play is can- celed and normal playback of the sound that was playing in the background resumes.

!To cancel the slip mode, press [SLIP] again.

Operating the CDJ-900 in combination with other devices

Starting playback using a DJ mixer’s fader (Fader Start)

1Connect the CDJ-900 with a Pioneer DJ mixer using the included control cord.

For instructions on connecting, see Basic style on page 11.

2 Move the DJ mixer’s channel fader or cross fader.

The DJ player’s pause mode is canceled and the track is played instantaneously. Also refer to the operating instructions of the connected DJ mixer.

!When the channel fader or cross fader is set back to its original position, play- back cues back to the set cue point and the pause mode is set (Back Cue).

Relay play on two DJ players

1 Connect the CDJ-900 and a DJ mixer.

For instructions on connecting, see Connections for relay play on page 12.

2Set the DJ mixer’s cross fader to the center position.

3Turn auto cue on for both DJ players.

The DJ players’ auto cue indicators light.

4 Start playback on this unit.

The first track on this unit is played, and once it finished playback begins auto- matically on the other DJ player. This unit cues to the beginning of the next track and pauses. This operation is repeated for relay play between the two DJ players.

!The medium can be changed and the cue point set on the DJ player that is in standby.

!If the power of one DJ player is turned off during playback, playback may start on the other DJ player.

!The fader start function does not work during relay play.

!Relay play may not be possible if the two DJ players are not connected to the same DJ mixer.

En 17