Porter-Cable H450CS, CH350CS, H650CS instruction manual Specification

Page 2

SPECIFICATION

MODEL

H650CS

H450CS

CH350CS

HORSE POWER

13

9

6.5

RATED/SURGE WATTS

6500/8000

4500/5500

3500/4375

VOLTAGE

120/240

120/240

120/240

AMPERAGE

54.2/27.1A

37.5/18.8A

29.2/14.6A

PHASE

SINGLE

SINGLE

SINGLE

HERTZ

60 Hz

60 Hz

60 Hz

ENGINE SPEED

3600 RPM

3600 RPM

3600 RPM

MAX. AMBIENT TEMP.

104° F

104° F

104° F

FUEL CAPACITY

7 GALLON

7 GALLON

4 GALLON

RUN TIME @ 50%/100%

9.4/6.0 HRS

13.4/8.7 HRS

11.6/7.8 HRS

This product is not equipped with a spark arresting muffler. If the product will be used around flammable materials, or on land covered with materials such as agricultural crops, forest, brush, grass, or other similar items, then an approved spark arrester must be installed and is legally required in the state of California. It is a violation of California statutes section 130050 and/or sections 4442 and 4443 of the California Public Resources Code, unless the engine is equipped with a spark arrestor, as defined in section 4442, and maintained in effective working order. Spark arresters are also required on some U. S. Forest service land and may also be legally required under other statutes and ordinances.

This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. This warning is given in compliance with California Proposition 65, as detectable amounts of chemicals subject to proposition 65 may be contained in this product.

2 — ENG

Image 2
Contents Instruction Manual Generators Specification CH350CSWarranty This Warranty is not Transferable and does not CoverHazard What could Happen HOW to Prevent IT Safety Guidelines DefinitionsImportant Safety Instructions Risk of Electrocution and FireOperation of generator in rain Wet, icy, or flooded conditionsDoors or in ANY Confined Risk of FireDo not Operate Unit AreaRisk of Breathing Inhalation Hazard Generator Risk of Unsafe OperationListed voltage surge protec Risk from Lifting Risk of HOT SurfacesRisk of Moving Parts Remove Generator from Carton AssemblyExtension Cord Wire Gauge Chart Length Grounding the GeneratorOperation Before Start UP Stopping Engine Connecting Electrical LoadsTo Start the Engine Maintenance Task MaintenanceGeneral Recommendations Engine Maintenance Customer Responsibilities TableTo test Generator MaintenanceStorage Wattage Calculations Running Watts Starting WattsStarting Wattage Requirements Volts X Amp = Watts Volts x 10 amps = 1200 wattsHousehold Wattage Calculator Appliance or Load Device Typical Device Wattage TotalTroubleshooting Guide Problem Cause CorrectionGenerator Quick Facts

CH350CS, H450CS, CH350CS, H650CS, CH350CS, H650CS specifications

The Porter-Cable H450CS, CH350CS, and H650CS are part of a renowned line of power tools designed for heavy-duty performance, catering to both professionals and DIY enthusiasts. These models deliver exceptional power and versatility, making them suitable for a diverse range of applications in woodworking, construction, and maintenance tasks.

The H450CS is an exceptional tool known for its lightweight design and robust performance. Featuring a powerful motor, it can handle various materials with ease, making it ideal for cutting, sanding, and shaping. The model’s ergonomic handle ensures comfort during extended use, while the quick-release blade mechanism allows for fast and easy blade changes. The H450CS also comes equipped with adjustable speed settings, allowing users to customize performance for different tasks, enhancing precision and control.

The CH350CS stands out with its impressive compactness and rugged construction. This model is designed for users who need a portable solution without compromising on power. The CH350CS features high-grade materials that ensure longevity and reliability, while its variable speed control provides adaptability for various applications. This tool excels in precise cuts and fine detail work, making it a favorite among carpenters and hobbyists alike. Additionally, it includes integrated dust management features, which enhance the user experience by minimizing cleanup.

The H650CS reflects the advanced technology that Porter-Cable is known for. This model includes innovative features such as an advanced motor cooling system that prolongs tool life by preventing overheating during extended use. Its heavy-duty construction makes it capable of handling tough jobs, while the user-friendly interface ensures that both beginners and experienced users can operate it effortlessly. The H650CS also incorporates safety features, including blade guards and anti-kickback mechanisms, providing added confidence for users during operation.

Overall, the Porter-Cable H450CS, CH350CS, and H650CS represent a top-tier selection of power tools. Their combination of advanced technologies, user-friendly designs, and high-quality construction makes them indispensable assets for professionals and DIY enthusiasts alike. Whether for intricate projects or substantial construction tasks, these models offer reliability and efficiency, positioning Porter-Cable as a leader in the power tool industry.