Porter-Cable CH350CS, H650CS Customer Responsibilities Table, Maintenance Task

Page 14

CONNECTING PROCEDURE FOR RAISING OR SUSPENDING GENERATORS (H650CS)

Failure to properly connect lifting cables, chains, or straps can cause property damage, serious injury or death, and void the manufacturer's warranty.

1.Route cable, chain, or strap through both lift rings as shown. ALWAYS use both lift rings when raising or

NOTE:suspending generator.

Make sure the generator is in a level position before raising or suspending to prevent damage.

Always use cables, chains, or straps rated at 2000 lbs. working load or more to raise or suspend gen- erator.

Never operate generator while suspended. This could cause property damage, serious injury or death.

Lift Ring

Lift Ring

MAINTENANCE

CUSTOMER RESPONSIBILITIES TABLE

Before each

Every 25

Every 50

Every 100

use

Hours or Every

Hours or Every

Hours or Every

 

Season

Season

Season

MAINTENANCE TASK

 

 

 

 

 

Check oil level

X

See Note 2

Change oil

 

See Note 1

 

 

 

Clean Air Filter Assembly

 

X

 

 

Check Spark Plug

 

X

 

 

Prepare Unit for Storage

Prepare unit for storage if it is to remain idle for more than 30 days.

Note 1: Change oil after first two (2) operating hours and every 50 operating hours thereafter, more often if operated in extreme dusty or dirty conditions.

Note 2: Check oil after 5 hours of operation

GENERAL RECOMMENDATIONS

ENGINE MAINTENANCE

The warranty of the generator does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain the generator as instructed in this manual.

Refer to the Engine Operator's manual for service and mainte- nance of the engine.

14 — ENG

Image 14
Contents Instruction Manual Generators Specification CH350CSWarranty This Warranty is not Transferable and does not CoverHazard What could Happen HOW to Prevent IT Safety Guidelines DefinitionsImportant Safety Instructions Risk of Electrocution and FireOperation of generator in rain Wet, icy, or flooded conditionsDoors or in ANY Confined Risk of FireDo not Operate Unit AreaRisk of Breathing Inhalation Hazard Generator Risk of Unsafe OperationListed voltage surge protec Risk from Lifting Risk of HOT SurfacesRisk of Moving Parts Remove Generator from Carton AssemblyExtension Cord Wire Gauge Chart Length Grounding the GeneratorOperation Before Start UP Stopping Engine Connecting Electrical LoadsTo Start the Engine Maintenance Task MaintenanceGeneral Recommendations Engine Maintenance Customer Responsibilities TableTo test Generator MaintenanceStorage Wattage Calculations Running Watts Starting WattsStarting Wattage Requirements Volts X Amp = Watts Volts x 10 amps = 1200 wattsHousehold Wattage Calculator Appliance or Load Device Typical Device Wattage TotalTroubleshooting Guide Problem Cause CorrectionGenerator Quick Facts

CH350CS, H450CS, CH350CS, H650CS, CH350CS, H650CS specifications

The Porter-Cable H450CS, CH350CS, and H650CS are part of a renowned line of power tools designed for heavy-duty performance, catering to both professionals and DIY enthusiasts. These models deliver exceptional power and versatility, making them suitable for a diverse range of applications in woodworking, construction, and maintenance tasks.

The H450CS is an exceptional tool known for its lightweight design and robust performance. Featuring a powerful motor, it can handle various materials with ease, making it ideal for cutting, sanding, and shaping. The model’s ergonomic handle ensures comfort during extended use, while the quick-release blade mechanism allows for fast and easy blade changes. The H450CS also comes equipped with adjustable speed settings, allowing users to customize performance for different tasks, enhancing precision and control.

The CH350CS stands out with its impressive compactness and rugged construction. This model is designed for users who need a portable solution without compromising on power. The CH350CS features high-grade materials that ensure longevity and reliability, while its variable speed control provides adaptability for various applications. This tool excels in precise cuts and fine detail work, making it a favorite among carpenters and hobbyists alike. Additionally, it includes integrated dust management features, which enhance the user experience by minimizing cleanup.

The H650CS reflects the advanced technology that Porter-Cable is known for. This model includes innovative features such as an advanced motor cooling system that prolongs tool life by preventing overheating during extended use. Its heavy-duty construction makes it capable of handling tough jobs, while the user-friendly interface ensures that both beginners and experienced users can operate it effortlessly. The H650CS also incorporates safety features, including blade guards and anti-kickback mechanisms, providing added confidence for users during operation.

Overall, the Porter-Cable H450CS, CH350CS, and H650CS represent a top-tier selection of power tools. Their combination of advanced technologies, user-friendly designs, and high-quality construction makes them indispensable assets for professionals and DIY enthusiasts alike. Whether for intricate projects or substantial construction tasks, these models offer reliability and efficiency, positioning Porter-Cable as a leader in the power tool industry.