Porter-Cable H450CS, CH350CS, H650CS Troubleshooting Guide, Problem Cause Correction

Page 19

TROUBLESHOOTING GUIDE

 

PROBLEM

 

CAUSE

 

CORRECTION

 

 

 

 

 

 

 

 

 

Engine will not start

1.

Low on fuel or oil.

1.

Add fuel or oil.

 

 

2.

Ignition switch in "Off" position.

2.

Turn to "ON" position

 

 

3.

Faulty spark plug.

3.

Replace spark plug.

 

 

4.

Choke in wrong position.

4.

Adjust choke accordingly.

 

 

5.

Fuel shut-off valve in closed

5.

Open fuel shut-off valve.

 

 

 

position.

 

 

 

 

 

6.

Unit loaded during start-up.

6.

Remove load from unit.

 

 

7.

Spark plug wire loose.

7.

Attach wire to spark plug.

 

 

 

 

 

 

 

 

No electrical output

1.

Faulty receptacle.

1.

Have Service Center replace.

 

 

2.

Circuit breaker kicked out.

2.

Depress and reset.

 

 

3.

Defective capacitor.

3.

Have Service Center replace

 

 

 

 

 

capacitor.

 

 

4.

Faulty power cord.

4.

Repair or replace cord.

 

 

5.

GFCI switch breaker kicked out

5.

Depress and reset

 

 

 

 

 

 

 

 

Repeated circuit breaker tripping

1.

Overload

1.

Reduce load.

 

 

2.

Faulty cords or equipment.

2.

Check for damaged, bare, or

 

 

 

 

 

frayed wires on equipment.

 

 

 

 

 

Replace.

 

 

 

 

 

 

 

 

Generator overheating

1.

Generator overloaded.

1.

Reduce load.

 

 

2.

Insufficient ventilation.

2.

Move to adequate supply of

 

 

 

 

 

fresh air.

 

 

 

 

 

 

No auto idle

1. Faulty solenoid

1. Have Service Center replace.

 

 

2. Faulty idle control switch

2. Have Service Center replace.

 

 

3. Faulty windings in stator

3. Have Service Center replace.

 

 

4. Faulty circuit board

4. Have Service Center replace.

 

 

5. Faulty wire harness

5. Have Service Center replace

 

 

 

 

 

 

DC does not have power with the

1. Faulty rectifier

1. Have Service Center replace.

 

circuit breaker depressed

2. Faulty windings in stator

2. Have Service Center replace.

 

 

3. Faulty wire harness

3. Have Service Center replace.

 

 

 

 

 

 

 

19 — ENG

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Instruction Manual Generators CH350CS SpecificationThis Warranty is not Transferable and does not Cover WarrantyRisk of Electrocution and Fire Safety Guidelines DefinitionsImportant Safety Instructions Hazard What could Happen HOW to Prevent ITWet, icy, or flooded conditions Operation of generator in rainArea Risk of FireDo not Operate Unit Doors or in ANY ConfinedRisk of Breathing Inhalation Hazard Listed voltage surge protec Risk of Unsafe OperationGenerator Risk of Moving Parts Risk of HOT SurfacesRisk from Lifting Grounding the Generator AssemblyExtension Cord Wire Gauge Chart Length Remove Generator from CartonOperation Before Start UP To Start the Engine Connecting Electrical LoadsStopping Engine Customer Responsibilities Table MaintenanceGeneral Recommendations Engine Maintenance Maintenance TaskStorage Generator MaintenanceTo test Running Watts Starting Watts Wattage CalculationsVolts X Amp = Watts Volts x 10 amps = 1200 watts Starting Wattage RequirementsAppliance or Load Device Typical Device Wattage Total Household Wattage CalculatorProblem Cause Correction Troubleshooting GuideGenerator Quick Facts

CH350CS, H450CS, CH350CS, H650CS, CH350CS, H650CS specifications

The Porter-Cable H450CS, CH350CS, and H650CS are part of a renowned line of power tools designed for heavy-duty performance, catering to both professionals and DIY enthusiasts. These models deliver exceptional power and versatility, making them suitable for a diverse range of applications in woodworking, construction, and maintenance tasks.

The H450CS is an exceptional tool known for its lightweight design and robust performance. Featuring a powerful motor, it can handle various materials with ease, making it ideal for cutting, sanding, and shaping. The model’s ergonomic handle ensures comfort during extended use, while the quick-release blade mechanism allows for fast and easy blade changes. The H450CS also comes equipped with adjustable speed settings, allowing users to customize performance for different tasks, enhancing precision and control.

The CH350CS stands out with its impressive compactness and rugged construction. This model is designed for users who need a portable solution without compromising on power. The CH350CS features high-grade materials that ensure longevity and reliability, while its variable speed control provides adaptability for various applications. This tool excels in precise cuts and fine detail work, making it a favorite among carpenters and hobbyists alike. Additionally, it includes integrated dust management features, which enhance the user experience by minimizing cleanup.

The H650CS reflects the advanced technology that Porter-Cable is known for. This model includes innovative features such as an advanced motor cooling system that prolongs tool life by preventing overheating during extended use. Its heavy-duty construction makes it capable of handling tough jobs, while the user-friendly interface ensures that both beginners and experienced users can operate it effortlessly. The H650CS also incorporates safety features, including blade guards and anti-kickback mechanisms, providing added confidence for users during operation.

Overall, the Porter-Cable H450CS, CH350CS, and H650CS represent a top-tier selection of power tools. Their combination of advanced technologies, user-friendly designs, and high-quality construction makes them indispensable assets for professionals and DIY enthusiasts alike. Whether for intricate projects or substantial construction tasks, these models offer reliability and efficiency, positioning Porter-Cable as a leader in the power tool industry.
Top Page Image Contents