Powermate P-WLE-0799-F2N specifications How to Clean the Air Filter, How to Check the Spark Plug

Page 15
Air Filter Cover
Air Filter Element
Cover Bolt

Maintenance (Continued)

• Save all instructions

F How to Clean the Air Filter

A dirty air filter will restrict air intake. Regular maintenance of air cleaner will help improve engine performance and re- duce emissions.

WARNING

Never clean air filter with gasoline or an easy ignited solvent because it may cause explosion.

NOTE: Refer to Figure 12 when following the steps below:

1. Remove the air filter cover bolts.

2. Remove the air filter cover.

3. Carefully remove air filter element to prevent dirt from falling into carburetor.

4. Clean all parts. Wash the air filter element in a nonflammable or high burning point solvent, and allow to dry thoroughly; dip the filter element in clean oil, and squeeze out all excess oil.

5. Reinstall the air filter element.

6. Replace air filter cover and tighten cover bolts.

Figure 12

G How to Check the Spark Plug

Spark Plug Model: Torch E7RTC

CAUTION

Only use the recommended spark plug or a spark plug with the same temperature range. Using an improper spark plug, an incorrect spark plug gap, or a dirty/fouled spark plug can reduce engine performance and cause damage.

1.Stop engine and allow it to cool.

2.Remove spark plug wire from spark plug.

3.Use the spark plug wrench and rod (included with edger) to remove the spark plug. (See Figure 13)

4.Visually inspect the spark plug for cracks or damage. If cracked, replace spark plug.

5.Clean carbon deposits. If excessive carbon build up, replace spark plug.

6.Check that the gap of the spark plug is 0.024-0.028 in. (0.6-0.7 mm). (See Figure 14)

7.Re-insert the spark plug and tighten using the spark plug wrench and rod. (See Figure 13)

NOTE: Torque of spark plug is 18-22 foot-pounds (25-30 Nm) 8. Reattach spark plug wire to spark plug.

Questions? Call Toll Free at 1-800-737-2112

14

Spark Plug

Wrench

and Rod

Figure 13

0.024 - 0.028 in 0.6 - 0.7 mm

Figure 14

Copyright © 2009 MAT Engine Technologies, LLC

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Operator’s Manual Lawn EdgerControl and Operating Symbols Safety DefinitionsSave all instructions Important Safety InformationPreparation Safety Operation SafetyStorage Safety Operation SafetyChildren Safety REPAIR, MAINTENANCE, and Adjustment SafetyDepth Selector Plate, 10. Depth Control Lever Control Rod Edger SpecificationsParts & Features Spark Plug/Spark Plug Wire Provides spark to ignite airToll Free AssemblyHow to Remove Edger from Carton How to Assemble the HandleAmbient Service Temperature Engine PreparationEngine Oil Before Starting the Engine HOW to Fill Engine with FuelOperation FuelHow to Start Engine Operation Save all instructions How to Stop the EdgerHow to Adjust Cutting Depth Edging TipsService MaintenancePeriodic Maintenance Schedule Table Service RecordsHow to Change the Engine Oil How to Replace the BeltLubrication How to Change the Blade How to Clean the Air Filter How to Check the Spark PlugSpark Plug Model Torch E7RTC How to Prepare for Storage Problem Possible Causes Solutions TroubleshootingMetl Corporate Office Correspondence only Technical ServiceWarranty Powermate Lawn Edger Limited WarrantyManufacturer’s Warranty Coverage Warranty Save all instructionsEmisson Control System Warranty Your Warranty Rightes and ObligationsLimitations of Liability Warranty CoverageHow to Obtain Warranty Service ExclusionsSystems Covered by this Warranty Parts Description WarrantyQuestions? Call Toll Free at Llame sin costo al Manual del usuarioSímbolos de control y funcionamiento Definiciones de seguridadSímbolos de alerta para sequradad Símbolos de advertencia para seguridadConserve todas las instrucciones Instrucciones de seguridad importantesResponsabilidad DEL Usuario Seguridad Durante EL USOSeguridad DEL Combustible Instrucciones de seguridad importantes la siguienteSeguridad DE Almacenamiento REPARACIÓN, Mantenimiento Y Seguridad DE AjusteSeguridad DE Niños Piezas y características Visto de un arrancador de retroceso de tiro cómodoCuchilla Elemento cortante rotativo Montaje Cómo sacar la bordeadora de la cajaCómo montar el asidero Aceite de motor Preparción del motorAntes de arrancar el motor Preparción del motor la siguienteUso CombustibleCómo arrancar el motor Consejos Para Bordear Uso la siguienteCómo ajustar la profundidad de corte Mantenimiento Programa DE Mantenimiento PeriódicoPrograma de mantenimiento Cómo reemplazar la faja Mantenimiento la siguienteLubericación Cómo cambiar el aceite del motorCómo cambiar la cuchilla Cómo reemplazar la faja la siguienteCómo limpiar al filtro de aire Cómo revisar la bujíaModelo de bujía Torch E7RTC Cómo preparala para almacenamiento Conserve todas las instrucciones Problema Diagnóstico y resolución de problemasSi necesita ayuda o tiene una duda Llame SIN Costo AL Garantía limitada de la Bordeadora Powermate Para CéspedServicio técnico GarantíaCobertura de la garantía del fabricante Garantía la siguiente Conserve todas las instruccionesGarantía del sistema pro control de emisiones contaminantes Derechos y obligaciones al amparo de la garantíaLimitación de responsabilidad Cobertura de la garantíaCómo obtener servicio de garantía ExclusionesGarantía la siguiente

P-WLE-0799-F2N specifications

The Powermate P-WLE-0799-F2N is a versatile and powerful generator designed to meet the diverse energy needs of homeowners and small businesses. Offering reliability and performance, the P-WLE-0799-F2N is ideal for both emergency backup power and recreational use.

One of the standout features of this generator is its robust engine, which delivers consistent and efficient power output. The generator is equipped with a reliable 7,000-watt peak and 5,500-watt continuous power capacity, providing enough energy to run essential appliances during outages or to power your tools and equipment at outdoor work sites.

The Powermate P-WLE-0799-F2N utilizes advanced inverter technology that ensures clean and stable power, making it safe for sensitive electronics such as laptops and smartphones. This technology reduces total harmonic distortion (THD), which is crucial for protecting delicate devices from damage.

Portability is another key characteristic of the P-WLE-0799-F2N. It features a compact design along with never-flat wheels and a folding handle, allowing users to transport the generator with ease. This makes it an excellent choice for camping trips, tailgating events, or any outdoor activity where power is needed.

The generator also comes with a user-friendly control panel that offers multiple outlets, including standard AC outlets and USB ports. This design provides versatility, enabling users to power several devices simultaneously while ensuring convenience and ease of use.

Safety is a priority for the Powermate P-WLE-0799-F2N, which includes features such as automatic low-oil shutdown and overload protection. These features safeguard the generator from potential damage, extending its lifespan and maintaining performance.

Another key benefit is the relatively quiet operation of the device, thanks to its sound-dampening technologies. With a noise level that is competitive compared to traditional generators, users can enjoy peace of mind without the disruptive sounds often associated with portable power solutions.

The Powermate P-WLE-0799-F2N is not only powerful and versatile but also designed with durability in mind, making it an excellent investment for anyone seeking a reliable source of portable power. Whether it's for emergency readiness, recreational use, or job site demands, this generator stands out as a dependable choice.
Top Page Image Contents