Powermate P-WLE-0799-F2N specifications Troubleshooting, Problem Possible Causes Solutions

Page 17

Troubleshooting

• Save all instructions

PROBLEM

POSSIBLE CAUSE(S)

SOLUTION(S)

Engine difficult to start

1. Out of fuel

1. Add fresh fuel

 

2.

Start lever is not compressed

2.

Pull start lever against handle

 

3.

Choke in “Run / Warm Start”

3.

Rotate Choke lever to “Choke / Cold Start”

 

position

position

 

4.

Spark plug wire disconnected

4. Attach spark plug wire to spark plug

 

5.

Fouled spark plug

5.

Remove spark plug. Inspect. Replace if

 

6.

Dirty Carburetor

necessary

 

6.

Take unit to an authorized service center

 

7.

Clogged air filter

for Carburetor cleaning

 

7.

Remove and clean air filter

 

8.

Clogged fuel filter

8.

Remove fuel filter. Inspect. Replace if

 

9.

Contaminated Fuel

necessary

 

9.

Drain fuel tank. Clean fuel tank. Fill with

 

 

 

fresh fuel

Engine Problems

1. No Engine Oil

1. Add engine oil

Engine smokes excessively

2. Engine oil not at proper level

2.

Check engine oil. Add or drain engine oil if

Engine runs very “rough”

3. Fouled spark plug

necessary

Engine runs erratically

3.

Remove spark plug. Inspect. Replace if

Engine cannot maintain full speed

4.

Clogged air filter

necessary

 

4.

Remove and clean air filter

 

5.

Clogged fuel filter

5.

Remove fuel filter. Inspect. Replace if

 

6.

Contaminated Fuel

necessary

 

6.

Drain fuel tank. Clean fuel tank. Fill with

 

7.

Carburetor out of adjustment

fresh fuel

 

7.

Take unit to an authorized service center

 

8.

Choke in “Choke / Cold Start”

for Carburetor adjustment

 

8.

Rotate Choke to “Run / Warm Start”

 

position

position

 

 

 

 

Excessive vibration / noise

1. Loose parts

1.

Tighten all fasteners

 

2.

Engine problems (above)

2.

Refer to engine solutions (above)

 

 

 

 

Blade will not rotate

1. Debris interfering with blade

1.

Remove debris from around blade

 

2.

Blade loose

2.

Tighten blade nuts

 

3.

Belt Loose

3.

Replace Belt

Engine will not stop

Flameout wire terminals

Connect handle and engine flameout wire

 

disconnected

terminals

Blade will not cut properly

Damaged or worn blade

Replace blade

 

 

 

 

Frequent engine stalling

1. Excessive edging speed / depth

1.

Edge at a moderate pace. Make multiple

 

2.

Engine problems (above)

passes.

 

2.

Refer to engine solutions (above)

Questions? Call Toll Free at 1-800-737-2112

16

Copyright © 2009 MAT Engine Technologies, LLC

Image 17
Contents Operator’s Manual Lawn EdgerControl and Operating Symbols Safety DefinitionsPreparation Safety Important Safety InformationOperation Safety Save all instructionsStorage Safety Operation SafetyChildren Safety REPAIR, MAINTENANCE, and Adjustment SafetyParts & Features Edger SpecificationsSpark Plug/Spark Plug Wire Provides spark to ignite air Depth Selector Plate, 10. Depth Control Lever Control RodHow to Remove Edger from Carton AssemblyHow to Assemble the Handle Toll FreeEngine Oil Ambient Service TemperatureEngine Preparation Operation HOW to Fill Engine with FuelFuel Before Starting the EngineHow to Start Engine How to Adjust Cutting Depth How to Stop the EdgerEdging Tips Operation Save all instructionsPeriodic Maintenance Schedule Table MaintenanceService Records ServiceLubrication How to Change the Engine OilHow to Replace the Belt How to Change the Blade Spark Plug Model Torch E7RTC How to Clean the Air FilterHow to Check the Spark Plug How to Prepare for Storage Problem Possible Causes Solutions TroubleshootingWarranty Technical ServicePowermate Lawn Edger Limited Warranty Metl Corporate Office Correspondence onlyEmisson Control System Warranty Warranty Save all instructionsYour Warranty Rightes and Obligations Manufacturer’s Warranty CoverageHow to Obtain Warranty Service Warranty CoverageExclusions Limitations of LiabilitySystems Covered by this Warranty Parts Description WarrantyQuestions? Call Toll Free at Llame sin costo al Manual del usuarioSímbolos de alerta para sequradad Definiciones de seguridadSímbolos de advertencia para seguridad Símbolos de control y funcionamientoResponsabilidad DEL Usuario Instrucciones de seguridad importantesSeguridad Durante EL USO Conserve todas las instruccionesSeguridad DEL Combustible Instrucciones de seguridad importantes la siguienteSeguridad DE Niños Seguridad DE AlmacenamientoREPARACIÓN, Mantenimiento Y Seguridad DE Ajuste Cuchilla Elemento cortante rotativo Piezas y característicasVisto de un arrancador de retroceso de tiro cómodo Cómo montar el asidero MontajeCómo sacar la bordeadora de la caja Aceite de motor Preparción del motorUso Preparción del motor la siguienteCombustible Antes de arrancar el motorCómo arrancar el motor Cómo ajustar la profundidad de corte Consejos Para BordearUso la siguiente Programa de mantenimiento MantenimientoPrograma DE Mantenimiento Periódico Lubericación Mantenimiento la siguienteCómo cambiar el aceite del motor Cómo reemplazar la fajaCómo cambiar la cuchilla Cómo reemplazar la faja la siguienteModelo de bujía Torch E7RTC Cómo limpiar al filtro de aireCómo revisar la bujía Cómo preparala para almacenamiento Conserve todas las instrucciones Problema Diagnóstico y resolución de problemasServicio técnico Garantía limitada de la Bordeadora Powermate Para CéspedGarantía Si necesita ayuda o tiene una duda Llame SIN Costo ALGarantía del sistema pro control de emisiones contaminantes Garantía la siguiente Conserve todas las instruccionesDerechos y obligaciones al amparo de la garantía Cobertura de la garantía del fabricanteCómo obtener servicio de garantía Cobertura de la garantíaExclusiones Limitación de responsabilidadGarantía la siguiente

P-WLE-0799-F2N specifications

The Powermate P-WLE-0799-F2N is a versatile and powerful generator designed to meet the diverse energy needs of homeowners and small businesses. Offering reliability and performance, the P-WLE-0799-F2N is ideal for both emergency backup power and recreational use.

One of the standout features of this generator is its robust engine, which delivers consistent and efficient power output. The generator is equipped with a reliable 7,000-watt peak and 5,500-watt continuous power capacity, providing enough energy to run essential appliances during outages or to power your tools and equipment at outdoor work sites.

The Powermate P-WLE-0799-F2N utilizes advanced inverter technology that ensures clean and stable power, making it safe for sensitive electronics such as laptops and smartphones. This technology reduces total harmonic distortion (THD), which is crucial for protecting delicate devices from damage.

Portability is another key characteristic of the P-WLE-0799-F2N. It features a compact design along with never-flat wheels and a folding handle, allowing users to transport the generator with ease. This makes it an excellent choice for camping trips, tailgating events, or any outdoor activity where power is needed.

The generator also comes with a user-friendly control panel that offers multiple outlets, including standard AC outlets and USB ports. This design provides versatility, enabling users to power several devices simultaneously while ensuring convenience and ease of use.

Safety is a priority for the Powermate P-WLE-0799-F2N, which includes features such as automatic low-oil shutdown and overload protection. These features safeguard the generator from potential damage, extending its lifespan and maintaining performance.

Another key benefit is the relatively quiet operation of the device, thanks to its sound-dampening technologies. With a noise level that is competitive compared to traditional generators, users can enjoy peace of mind without the disruptive sounds often associated with portable power solutions.

The Powermate P-WLE-0799-F2N is not only powerful and versatile but also designed with durability in mind, making it an excellent investment for anyone seeking a reliable source of portable power. Whether it's for emergency readiness, recreational use, or job site demands, this generator stands out as a dependable choice.