Powermate P-WLE-0799-F2N Operation, HOW to Fill Engine with Fuel, Before Starting the Engine

Page 9

Engine Preparation (Continued)

• Save all instructions

B Fuel

WARNING

Gasoline is extremely flammable and vapors can explode if ignited. Handle with care.

Use fresh, clean, regular-unleaded gasoline with a minimum of 88 Octane.

Do NOT use leaded gasoline, gasohol, methanol, or diesel fuel. Do NOT mix oil with gasoline. Do NOT allow gasoline to become contaminated with dust, water, or debris.

CAUTION

Using incorrect fuel type or contaminated fuel will cause serious engine damage.

NOTE: Fuel tank capacity is approximately 1.69 qt (1.6L)

HOW TO FILL ENGINE WITH FUEL

WARNING

Turn engine off and let engine cool for several minutes before removing the fuel cap or adding fuel.

Never fill fuel tank indoors.

Do not smoke while adding fuel.

1.Clean surface around fuel tank cap to prevent contamination. (See Figure 3)

2.Loosen fuel cap slowly. After removing cap, place on a clean surface.

3.Pour fuel into the tank. Use care to avoid spillage.

WARNING

Do NOT OVERFILL fuel. Allow space for the fuel to expand due to heat from engine and/or sun.

4.Before replacing the fuel cap, inspect and clean the fuel cap seal.

5.Replace the fuel cap and securely hand-tighten.

6.Clean up any spilled fuel.

Operation

• Save all instructions

A

Before Starting the Engine

WARNING

Before starting engine, read operator’s manual. Become familiar with location and function of all controls. Know how to stop the engine quickly.

WARNING

Before starting the engine, check that the flameout wire terminals have been connected.

Before attempting to start the engine, review the following steps:

1.Unit has been assembled according to all assembly instructions.

2.Flameout wire terminals are connected.

3.Unit has been inspected for any damaged or missing components.

4.No parts are remaining in the carton.

Questions? Call Toll Free at 1-800-737-2112

8

Copyright © 2009 MAT Engine Technologies, LLC

Image 9
Contents Operator’s Manual Lawn EdgerControl and Operating Symbols Safety DefinitionsPreparation Safety Important Safety InformationOperation Safety Save all instructionsStorage Safety Operation SafetyChildren Safety REPAIR, MAINTENANCE, and Adjustment SafetyParts & Features Edger SpecificationsSpark Plug/Spark Plug Wire Provides spark to ignite air Depth Selector Plate, 10. Depth Control Lever Control RodHow to Remove Edger from Carton AssemblyHow to Assemble the Handle Toll FreeAmbient Service Temperature Engine PreparationEngine Oil Operation HOW to Fill Engine with FuelFuel Before Starting the EngineHow to Start Engine How to Adjust Cutting Depth How to Stop the EdgerEdging Tips Operation Save all instructionsPeriodic Maintenance Schedule Table MaintenanceService Records ServiceHow to Change the Engine Oil How to Replace the BeltLubrication How to Change the Blade How to Clean the Air Filter How to Check the Spark PlugSpark Plug Model Torch E7RTC How to Prepare for Storage Problem Possible Causes Solutions TroubleshootingWarranty Technical ServicePowermate Lawn Edger Limited Warranty Metl Corporate Office Correspondence onlyEmisson Control System Warranty Warranty Save all instructionsYour Warranty Rightes and Obligations Manufacturer’s Warranty CoverageHow to Obtain Warranty Service Warranty CoverageExclusions Limitations of LiabilitySystems Covered by this Warranty Parts Description WarrantyQuestions? Call Toll Free at Llame sin costo al Manual del usuarioSímbolos de alerta para sequradad Definiciones de seguridadSímbolos de advertencia para seguridad Símbolos de control y funcionamientoResponsabilidad DEL Usuario Instrucciones de seguridad importantesSeguridad Durante EL USO Conserve todas las instruccionesSeguridad DEL Combustible Instrucciones de seguridad importantes la siguienteSeguridad DE Almacenamiento REPARACIÓN, Mantenimiento Y Seguridad DE AjusteSeguridad DE Niños Piezas y características Visto de un arrancador de retroceso de tiro cómodoCuchilla Elemento cortante rotativo Montaje Cómo sacar la bordeadora de la cajaCómo montar el asidero Aceite de motor Preparción del motorUso Preparción del motor la siguienteCombustible Antes de arrancar el motorCómo arrancar el motor Consejos Para Bordear Uso la siguienteCómo ajustar la profundidad de corte Mantenimiento Programa DE Mantenimiento PeriódicoPrograma de mantenimiento Lubericación Mantenimiento la siguienteCómo cambiar el aceite del motor Cómo reemplazar la fajaCómo cambiar la cuchilla Cómo reemplazar la faja la siguienteCómo limpiar al filtro de aire Cómo revisar la bujíaModelo de bujía Torch E7RTC Cómo preparala para almacenamiento Conserve todas las instrucciones Problema Diagnóstico y resolución de problemasServicio técnico Garantía limitada de la Bordeadora Powermate Para CéspedGarantía Si necesita ayuda o tiene una duda Llame SIN Costo ALGarantía del sistema pro control de emisiones contaminantes Garantía la siguiente Conserve todas las instruccionesDerechos y obligaciones al amparo de la garantía Cobertura de la garantía del fabricanteCómo obtener servicio de garantía Cobertura de la garantíaExclusiones Limitación de responsabilidadGarantía la siguiente

P-WLE-0799-F2N specifications

The Powermate P-WLE-0799-F2N is a versatile and powerful generator designed to meet the diverse energy needs of homeowners and small businesses. Offering reliability and performance, the P-WLE-0799-F2N is ideal for both emergency backup power and recreational use.

One of the standout features of this generator is its robust engine, which delivers consistent and efficient power output. The generator is equipped with a reliable 7,000-watt peak and 5,500-watt continuous power capacity, providing enough energy to run essential appliances during outages or to power your tools and equipment at outdoor work sites.

The Powermate P-WLE-0799-F2N utilizes advanced inverter technology that ensures clean and stable power, making it safe for sensitive electronics such as laptops and smartphones. This technology reduces total harmonic distortion (THD), which is crucial for protecting delicate devices from damage.

Portability is another key characteristic of the P-WLE-0799-F2N. It features a compact design along with never-flat wheels and a folding handle, allowing users to transport the generator with ease. This makes it an excellent choice for camping trips, tailgating events, or any outdoor activity where power is needed.

The generator also comes with a user-friendly control panel that offers multiple outlets, including standard AC outlets and USB ports. This design provides versatility, enabling users to power several devices simultaneously while ensuring convenience and ease of use.

Safety is a priority for the Powermate P-WLE-0799-F2N, which includes features such as automatic low-oil shutdown and overload protection. These features safeguard the generator from potential damage, extending its lifespan and maintaining performance.

Another key benefit is the relatively quiet operation of the device, thanks to its sound-dampening technologies. With a noise level that is competitive compared to traditional generators, users can enjoy peace of mind without the disruptive sounds often associated with portable power solutions.

The Powermate P-WLE-0799-F2N is not only powerful and versatile but also designed with durability in mind, making it an excellent investment for anyone seeking a reliable source of portable power. Whether it's for emergency readiness, recreational use, or job site demands, this generator stands out as a dependable choice.