Powermate P-WLE-0799-F2N specifications How to Change the Blade

Page 14

Maintenance (Continued)

• Save all instructions

D How to Replace the Belt (Continued)

3.Remove the two Front Guard Screws and the Belt Guard. (See Figure 10)

4.Push the blade arm toward the unit to compress the blade arm spring and slacken the belt. TIP: This can be accomplished by using a ratcheting tie-down strap. Always follow the strap manufacturer’s instructions.

5.Remove the old belt from the engine and quill assembly pulleys.

6.To install a replacement belt from the manufacturer, reverse the steps above.

•The rear guard bolts should be tightened to 13-16 foot-pounds [18-22N-m].

•The front guard screws should be tightened to 4-6 foot-pounds [6-8N-m].

E How to Change the Blade

Front Guard

Screws

Belt Guard

 

Front Guard

 

Screws

Figure 10

 

WARNING

Do not sharpen the blade. Sharpening can damage the blade and cause it to break, which can cause injury to you or to others.

The blade is subject to nicks, scratches, and dents, which will generally not affect function. The blade is also subject to wear – reducing the cutting depth. Replace a worn blade by following the steps below:

IMPORTANT: Only use a replacement blade from the manufacturer. To order spare parts call us at 1-800-737-2112.

Note: Replacing the blade requires two (2) 12” adjustable wrenches, or two (2) 3/4 in. [19mm] wrenches.

1.Shut off engine.

2.Disconnect the spark plug wire from the spark plug.

3.Remove the blade locknut that holds the blade to the drive shaft. (See Figure 11)

WARNING

To remove or tighten the blade locknut, always use the method shown in Figure 11. Always position the holding wrench on the nut behind the blade.

4.Remove the blade.

5.Replace with new blade from the manufacturer by reversing the above steps.

Note: Tighten the blade locknut to 35-45 foot-pounds (47-61 N-m)

Turn counter-clockwise to loosen

Turn clockwise

to tighten

Hold Nut,

 

Do Not Turn

Figure 11

Blade Locknut

Questions? Call Toll Free at 1-800-737-2112

13

Copyright © 2009 MAT Engine Technologies, LLC

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Lawn Edger Operator’s ManualSafety Definitions Control and Operating SymbolsOperation Safety Important Safety InformationPreparation Safety Save all instructionsOperation Safety Storage SafetyREPAIR, MAINTENANCE, and Adjustment Safety Children SafetySpark Plug/Spark Plug Wire Provides spark to ignite air Edger SpecificationsParts & Features Depth Selector Plate, 10. Depth Control Lever Control RodHow to Assemble the Handle AssemblyHow to Remove Edger from Carton Toll FreeEngine Oil Ambient Service TemperatureEngine Preparation Fuel HOW to Fill Engine with FuelOperation Before Starting the EngineHow to Start Engine Edging Tips How to Stop the EdgerHow to Adjust Cutting Depth Operation Save all instructionsService Records MaintenancePeriodic Maintenance Schedule Table ServiceLubrication How to Change the Engine OilHow to Replace the Belt How to Change the Blade Spark Plug Model Torch E7RTC How to Clean the Air FilterHow to Check the Spark Plug How to Prepare for Storage Troubleshooting Problem Possible Causes SolutionsPowermate Lawn Edger Limited Warranty Technical ServiceWarranty Metl Corporate Office Correspondence onlyYour Warranty Rightes and Obligations Warranty Save all instructionsEmisson Control System Warranty Manufacturer’s Warranty CoverageExclusions Warranty CoverageHow to Obtain Warranty Service Limitations of LiabilityWarranty Systems Covered by this Warranty Parts DescriptionQuestions? Call Toll Free at Manual del usuario Llame sin costo alSímbolos de advertencia para seguridad Definiciones de seguridadSímbolos de alerta para sequradad Símbolos de control y funcionamientoSeguridad Durante EL USO Instrucciones de seguridad importantesResponsabilidad DEL Usuario Conserve todas las instruccionesInstrucciones de seguridad importantes la siguiente Seguridad DEL CombustibleSeguridad DE Niños Seguridad DE AlmacenamientoREPARACIÓN, Mantenimiento Y Seguridad DE Ajuste Cuchilla Elemento cortante rotativo Piezas y característicasVisto de un arrancador de retroceso de tiro cómodo Cómo montar el asidero MontajeCómo sacar la bordeadora de la caja Preparción del motor Aceite de motorCombustible Preparción del motor la siguienteUso Antes de arrancar el motorCómo arrancar el motor Cómo ajustar la profundidad de corte Consejos Para BordearUso la siguiente Programa de mantenimiento MantenimientoPrograma DE Mantenimiento Periódico Cómo cambiar el aceite del motor Mantenimiento la siguienteLubericación Cómo reemplazar la fajaCómo reemplazar la faja la siguiente Cómo cambiar la cuchillaModelo de bujía Torch E7RTC Cómo limpiar al filtro de aireCómo revisar la bujía Cómo preparala para almacenamiento Diagnóstico y resolución de problemas Conserve todas las instrucciones ProblemaGarantía Garantía limitada de la Bordeadora Powermate Para CéspedServicio técnico Si necesita ayuda o tiene una duda Llame SIN Costo ALDerechos y obligaciones al amparo de la garantía Garantía la siguiente Conserve todas las instruccionesGarantía del sistema pro control de emisiones contaminantes Cobertura de la garantía del fabricanteExclusiones Cobertura de la garantíaCómo obtener servicio de garantía Limitación de responsabilidadGarantía la siguiente

P-WLE-0799-F2N specifications

The Powermate P-WLE-0799-F2N is a versatile and powerful generator designed to meet the diverse energy needs of homeowners and small businesses. Offering reliability and performance, the P-WLE-0799-F2N is ideal for both emergency backup power and recreational use.

One of the standout features of this generator is its robust engine, which delivers consistent and efficient power output. The generator is equipped with a reliable 7,000-watt peak and 5,500-watt continuous power capacity, providing enough energy to run essential appliances during outages or to power your tools and equipment at outdoor work sites.

The Powermate P-WLE-0799-F2N utilizes advanced inverter technology that ensures clean and stable power, making it safe for sensitive electronics such as laptops and smartphones. This technology reduces total harmonic distortion (THD), which is crucial for protecting delicate devices from damage.

Portability is another key characteristic of the P-WLE-0799-F2N. It features a compact design along with never-flat wheels and a folding handle, allowing users to transport the generator with ease. This makes it an excellent choice for camping trips, tailgating events, or any outdoor activity where power is needed.

The generator also comes with a user-friendly control panel that offers multiple outlets, including standard AC outlets and USB ports. This design provides versatility, enabling users to power several devices simultaneously while ensuring convenience and ease of use.

Safety is a priority for the Powermate P-WLE-0799-F2N, which includes features such as automatic low-oil shutdown and overload protection. These features safeguard the generator from potential damage, extending its lifespan and maintaining performance.

Another key benefit is the relatively quiet operation of the device, thanks to its sound-dampening technologies. With a noise level that is competitive compared to traditional generators, users can enjoy peace of mind without the disruptive sounds often associated with portable power solutions.

The Powermate P-WLE-0799-F2N is not only powerful and versatile but also designed with durability in mind, making it an excellent investment for anyone seeking a reliable source of portable power. Whether it's for emergency readiness, recreational use, or job site demands, this generator stands out as a dependable choice.
Top Page Image Contents