Poulan 182705 owner manual Install Seat See Fig

Page 7

ASSEMBLY

INSTALL SEAT (See Fig. 3)

Adjust seat before tightening adjustment knob.

•Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

•Pivot seat upward and remove from the cardboard packing. Remove the cardboard packing and discard.

•Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

•Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

•Pivot seat and pan forward and assemble adjustment knob and flat washer loosely. Do not tighten.

•Lower seat into operating position and sit on seat.

•Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

•Get off seat without moving its adjusted position.

•Raise seat and tighten adjustment knob securely.

SEAT

SEAT PAN

SHOULDER

BOLT

FLAT WASHER

ADJUSTMENT

KNOB

FIG. 3

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Operation section, page 10, for location and function of controls)

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Release parking brake by depressing clutch/brake pedal.

•Place freewheel control in freewheeling position to disengage transmission (See “TO TRANSPORT” in the Operation section of this manual).

•Roll tractor forward off skid.

•Remove banding holding deflector shield up against tractor.

TO DRIVE TRACTOR OFF SKID (See Opera- tion section, page 10, for location and func- tion of controls)

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

•Be sure all the above assembly steps have been completed.

•Check engine oil level and fill fuel tank with gasoline.

•Place freewheel control in "transmission engaged" po- sition.

•Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

•Place motion control lever in neutral (N) position.

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Start the engine. After engine has started, move throttle control to idle position.

•Release parking brake.

•Slowly move the motion control lever forward and slowly drive tractor off skid.

•Apply brake to stop tractor, set parking brake and place motion control lever in neutral position.

•Turn ignition key to "OFF" position.

Continue with the instructions that follow.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents PR17H42STE II. Slope Operation Safety RulesIV. Service General OperationSafe Operation Practices for Ride-On Mowers Safety RulesTable of Contents Key Unassembled PartsSteering Wheel Seat Slope SheetAssembly Install Seat See Fig To Convert to Bagging or Discharging To SET UP Your Mower for MulchingCheck Tire Pressure Check Deck LevelnessOperation Know Your Tractor To USE Throttle Control See Fig HOW to USE Your TractorTo Adjust Mower Cutting Height See Fig Stopping See Fig To SET Parking Brake See FigTo Transport See Figs To Adjust Gauge Wheels See FigTo Operate on Hills To Operate Mower See FigTo Start Engine See Fig Before Starting the EngineCheck Engine OIL Level ADD GasolineMulching Mowing Tips Mowing TipsGeneral Recommendations Lubrication ChartService Dates Customer ResponsibilitiesTractor Engine Muffler CleaningEngine Cooling Fins AIR FilterTo Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig Belt Removal To Level Mower HousingBelt Installation To Replace Mower Blade Drive Belt See FigTo Replace Motion Drive Belt See Fig To Adjust Brake See FigTransmission REMOVAL/REPLACEMENT Transaxle Motion Control Lever Neutral ADJUSTMENTSee FigFront Wheel TOE-IN/CAMBER To Adjust Steering Wheel AlignmentTo Start Engine with a Weak Battery See Fig Replacing Battery See FigsInterlocks and Relays To Adjust Throttle Control CableTo Adjust Carburetor To Replace Headlight BulbEngine OIL StorageOther Fuel SystemTroubleshooting Points OFF Tractor - Model Number PR17H42STE, Product Number 954 56 SchematicElectrical KEY Part Description Chassis and Enclosures Screw Hex Wshd 8-18 x 7/8 Drive Transaxle Hydro Gear Steering Assembly KEY Part NO. NO. Description Seat Assembly Wheels and Tires DecalsEngine 170551 Control Th/ch Flag Mower Deck Repair Parts Mower Lift 159460 Wire Asm Inner/Sprg W/plunger LT Page Page Limited Warranty Only Ride UP and Down Hill Not Across Hill Degrees MAX Fold Along This Dotted Line DegreeParts and Service

182705 specifications

The Poulan 182705 is a versatile and reliable chainsaw designed for both homeowners and professionals who require a robust tool for cutting firewood, trimming branches, and tackling general landscaping tasks. Its design combines power and user-friendly features, making it an excellent choice for those who need a dependable saw that can handle various tasks around the yard or property.

One of the standout features of the Poulan 182705 is its powerful engine. Equipped with a 42cc, 2-cycle gas engine, this chainsaw delivers a solid performance, ensuring that it can cut through hardwood and thick branches with ease. The engine is designed for optimal efficiency, allowing users to accomplish more work with less fuel consumption, which is both cost-effective and environmentally friendly.

Another significant highlight of the Poulan 182705 is its lightweight construction. Weighing in at about 11 pounds, this chainsaw is easy to maneuver, making it suitable for extended use without causing excessive fatigue. Its well-balanced design enhances control during operation, contributing to safer handling, especially for users who may not have extensive experience with chainsaws.

Safety is paramount in using power tools, and the Poulan 182705 is equipped with several safety features to protect the user. It includes a trigger lockout to prevent accidental starting, a chain brake that stops the chain immediately in the event of kickback, and a low-kickback chain that minimizes the risk of unwanted movement during cutting.

The chainsaw also features an automatic oiling system, which lubricates the bar and chain during operation, ensuring smooth cutting and reducing wear on the equipment. This not only extends the life of the chainsaw but also allows for maintenance-free operation for extended periods.

Additionally, the Poulan 182705 incorporates an easy-start technology that simplifies the starting process, reducing the time and effort required to get to work. This is especially beneficial for users who may struggle with traditional pull-start mechanisms.

Overall, the Poulan 182705 offers a combination of power, efficiency, and safety features that make it an ideal choice for both occasional and regular use. Whether you are a homeowner taking care of seasonal yard work or a professional in need of a reliable chainsaw, the Poulan 182705 delivers performance and ease of use that stand out in the market.
Top Page Image Contents