Poulan 271190, 189956 manual Table of Contents

Page 2

TABLE OF CONTENTS

Safety Rules

2

Maintenance

16

Product Specifications

5

Service and Adjustments

20

Assembly/Pre-Operation

7

Storage

25

Operation

10

Troubleshooting

26

Maintenance Schedule

16

Repair Parts

30

 

 

Warranty

46

SAFETY RULES

IMPORTANT: This cutting machine is capable of amputating hands and feet and throw- ing objects. Failure to observe the following safety instructions could result in serious injury or death.

I. GENERAL OPERATION

Read, understand, and follow all instruc- tions in the manual and on the machine before starting.

Only allow responsible adults, who are familiar with the instructions, to operate the machine.

Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blade.

Be sure the area is clear of other people before mowing. Stop machine if anyone enters the area.

Never carry passengers.

Do not mow in reverse unless abso- lutely necessary. Always look down and behind before and while backing.

Be aware of the mower discharge direc- tion and do not point it at anyone. Do not operate the mower without either the entire grass catcher or the guard in place.

Slow down before turning.

Never leave a running machine unat- tended. Always turn off blades, set park- ing brake, stop engine, and remove keys before dismounting.

Turn off blades when not mowing.

Stop engine before removing grass catcher or unclogging chute.

Mow only in daylight or good artificial light.

Do not operate the machine while under the influence of alcohol or drugs.

Watch for traffic when operating near or crossing roadways.

Use extra care when loading or un- loading the machine into a trailer or truck.

Data indicates that operators, age 60 years and above, are involved in a large

percentage of riding mower-related in-

 

juries. These operators should evaluate

 

their ability to operate the riding mower

 

safely enough to protect themselves and

2

others from serious injury.

Keep machine free of grass , leaves or other debris build-up which can touch hot exhaust / engine parts and burn . Do not allow the mower deck to plow leaves or other debris which can cause build-up to occur. Clean any oil or fuel spillage before operating or storing the machine . Allow machine to cool before storage.

II. SLOPE OPERATION

Slopes are a major factor related to loss- of-control and tipover accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it.

DO:

Mow up and down slopes, not across.

Remove obstacles such as rocks, tree limbs, etc.

Watch for holes, ruts, or bumps. Un- even terrain could overturn the machine. Tall grass can hide obstacles.

Use slow speed. Choose a low gear so that you will not have to stop or shift while on the slope.

Follow the manufacturer’s recommend- ations for wheel weights or counter- weights to improve stability.

Use extra care with grass catchers or other attachments. These can change the stability of the machine.

Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction.

Avoid starting or stopping on a slope. If tires lose traction, disengage the blades and proceed slowly straight down the slope.

DO NOT:

Do not turn on slopes unless neces- sary, and then, turn slowly and grad- ually downhill, if possible.

Image 2
Contents Model no Table of Contents IV. Service III. ChildrenWash hands after handling API-SF-SJ Product SpecificationsCustomer Responsibilities U1RUnassembled Parts Before Removing Tractor from Skid Tools Required for AssemblyTo Remove Tractor from Carton Unpack CartonCheck Battery HOW to SET UP Your TractorInstall Seat Check Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine To Start Engine ADD GasolineMowing Tips General Recommendations Lubrication Chart Before Each USETractor Engine AIR FilterMuffler CleaningEngine Cooling System Spark PlugsTo Install Mower To Remove MowerTo Replace Mower Blade Drive Belt To Level Mower HousingSIDE-TO-SIDE Adjustment Belt RemovalTo Adjust Brake Belt InstallationTo Check and Adjust Brake To Check BrakeReplacing Battery To Start Engine with a Weak BatteryTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN/CAMBERTo Adjust Carburetor Fuel System BatteryOther Engine OILTroubleshooting Chart Problem Cause CorrectionExcessive Mower blades will Schematic Tractor -- Model NumberRepair Parts ElectricalKEY Part Description Chassis and Enclosures 174620 Chassis 176554 Drawbar 155272 Ground Drive Bolt Hex 7/16-20 x 4 Gr -1.5 Thr Steering KEY Part NO. NO. Description Engine Optional Equipment Engine Seat Assembly Decals Wheels and TiresLift Assembly Retainer Spring Mower Deck Screw Hex Thd Cut 1/4-20 x 1/2 Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation

189956, 271190 specifications

The Poulan 189956,271190 is a standout product in the realm of outdoor power equipment, specifically designed for lawn care and maintenance. This model is known for its impressive combination of power, efficiency, and usability, making it an ideal choice for both homeowners and professional landscapers alike.

One of the primary features of the Poulan 189956,271190 is its robust engine. Typically equipped with a reliable two-cycle engine, this product delivers considerable power, making quick work of trimming and clearing yard debris. The engine’s design ensures efficient fuel consumption, allowing users to maximize their operational time without frequent refueling.

In terms of cutting performance, the Poulan 189956,271190 is engineered with a precision cutting system. This includes a high-quality cutting blade that guarantees clean cuts and effective trimming. The adjustable cutting height feature allows users to customize the cutting depth based on their specific lawn requirements, ensuring optimal results every time.

User comfort and convenience are also prioritized with this model. The ergonomic design provides a comfortable grip and reduced vibration, minimizing user fatigue during extended periods of operation. The lightweight construction of the equipment contributes to ease of handling, allowing for agile maneuvering around obstacles in the garden or lawn.

Technologically, the Poulan 189956,271190 incorporates innovations that enhance performance and durability. The air filtration system, for example, is designed to extend the lifespan of the engine by reducing dust and debris intake. Additionally, the easy-start mechanism simplifies the ignition process, enabling users to get started quickly without unnecessary hassle.

Safety features are another significant aspect of the Poulan 189956,271190. The model typically comes with a protective guard that shields operators from flying debris, while also providing a secure operating environment. The tool’s design includes safety switches and mechanisms that prevent accidental starting, ensuring a safe user experience.

In summary, the Poulan 189956,271190 is a reliable, efficient, and user-friendly option for outdoor maintenance. Its powerful engine, adjustable cutting features, ergonomic design, and safety mechanisms make it a preferred choice for anyone looking to maintain their garden or lawn effectively. With advanced technologies and thoughtful features, this model stands out in its category, delivering excellent performance whether for personal use or professional landscaping tasks.