Poulan 189956, 271190 manual Battery, Other, Fuel System, Engine OIL, Cylinders

Page 25

STORAGE

Immediately prepare your tractor for stor- age at the end of the season or if the trac- tor will not be used for 30 days or more.

WARNING: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage. When mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

1.Clean entire tractor (See “CLEANING” in the Maintenance section of this manual).

2.Inspect and replace belts, if necessary (See belt replacement instructions in the Service and Adjustments section of this manual).

3.Lubricate as shown in the Maintenance section of this manual.

4.Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

5.Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BATTERY

•Fully charge the battery for storage.

•After a period of time in storage, battery may require recharging.

•To help prevent corrosion and power leakage during long periods of storage, battery cables should be disconnected and battery cleaned thoroughly (see “TO CLEAN BATTERY AND TERMINALS” in the Maintenance section of this manual).

•After cleaning, leave cables discon- nected and place cables where they cannot come in contact with battery terminals.

•If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel hose, or tank during storage. Also, alcohol

blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can dam- age the fuel system of an engine while in storage.

•Empty the fuel tank by starting the en- gine and letting it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

•Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or stor- age container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the car- buretor. Do not empty the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER(S)

1.Remove spark plug(s).

2.Pour one ounce of oil through spark plug hole(s) into cylinder(s).

3.Turn ignition key to start position for a few seconds to distribute oil.

4.Replace with new spark plug(s).

OTHER

•Do not store gasoline from one season to another.

•Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

•If possible, store your tractor indoors and cover it to give protection from dust and dirt.

•Cover your tractor with a suitable pro- tective cover that does not retain mois- ture. Do not use plastic. Plastic cannot breathe which allows condensation to

form and will cause your tractor to rust. IMPORTANT: Never cover tractor while engine and exhaust areas are still warm.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Model no Table of Contents III. Children IV. ServiceWash hands after handling Customer Responsibilities Product SpecificationsAPI-SF-SJ U1RUnassembled Parts To Remove Tractor from Carton Tools Required for AssemblyBefore Removing Tractor from Skid Unpack CartonInstall Seat HOW to SET UP Your TractorCheck Battery Check for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine ADD Gasoline To Start EngineMowing Tips Before Each USE General Recommendations Lubrication ChartTractor AIR Filter EngineEngine Cooling System CleaningMuffler Spark PlugsTo Remove Mower To Install MowerSIDE-TO-SIDE Adjustment To Level Mower HousingTo Replace Mower Blade Drive Belt Belt RemovalTo Check and Adjust Brake Belt InstallationTo Adjust Brake To Check BrakeTo Adjust Steering Wheel ALIGN- Ment To Start Engine with a Weak BatteryReplacing Battery Front Wheel TOE-IN/CAMBERTo Adjust Carburetor Other BatteryFuel System Engine OILProblem Cause Correction Troubleshooting ChartExcessive Mower blades will Tractor -- Model Number SchematicElectrical Repair PartsKEY Part Description Chassis and Enclosures 174620 Chassis 176554 Drawbar 155272 Ground Drive Bolt Hex 7/16-20 x 4 Gr -1.5 Thr Steering KEY Part NO. NO. Description Engine Optional Equipment Engine Seat Assembly Wheels and Tires DecalsLift Assembly Retainer Spring Mower Deck Screw Hex Thd Cut 1/4-20 x 1/2 Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation

189956, 271190 specifications

The Poulan 189956,271190 is a standout product in the realm of outdoor power equipment, specifically designed for lawn care and maintenance. This model is known for its impressive combination of power, efficiency, and usability, making it an ideal choice for both homeowners and professional landscapers alike.

One of the primary features of the Poulan 189956,271190 is its robust engine. Typically equipped with a reliable two-cycle engine, this product delivers considerable power, making quick work of trimming and clearing yard debris. The engine’s design ensures efficient fuel consumption, allowing users to maximize their operational time without frequent refueling.

In terms of cutting performance, the Poulan 189956,271190 is engineered with a precision cutting system. This includes a high-quality cutting blade that guarantees clean cuts and effective trimming. The adjustable cutting height feature allows users to customize the cutting depth based on their specific lawn requirements, ensuring optimal results every time.

User comfort and convenience are also prioritized with this model. The ergonomic design provides a comfortable grip and reduced vibration, minimizing user fatigue during extended periods of operation. The lightweight construction of the equipment contributes to ease of handling, allowing for agile maneuvering around obstacles in the garden or lawn.

Technologically, the Poulan 189956,271190 incorporates innovations that enhance performance and durability. The air filtration system, for example, is designed to extend the lifespan of the engine by reducing dust and debris intake. Additionally, the easy-start mechanism simplifies the ignition process, enabling users to get started quickly without unnecessary hassle.

Safety features are another significant aspect of the Poulan 189956,271190. The model typically comes with a protective guard that shields operators from flying debris, while also providing a secure operating environment. The tool’s design includes safety switches and mechanisms that prevent accidental starting, ensuring a safe user experience.

In summary, the Poulan 189956,271190 is a reliable, efficient, and user-friendly option for outdoor maintenance. Its powerful engine, adjustable cutting features, ergonomic design, and safety mechanisms make it a preferred choice for anyone looking to maintain their garden or lawn effectively. With advanced technologies and thoughtful features, this model stands out in its category, delivering excellent performance whether for personal use or professional landscaping tasks.
Top Page Image Contents