Before Starting the Engine

•The average lawn should be cut to ap- proximately 2-1/2 inches during the cool season and to over 3 inches during hot months. For healthier and better looking lawns, mow often and after moderate growth.

•For best cutting performance, grass over 6 inches in height should be mowed twice. Make the ﬁrst cut relatively high; the second to desired height.

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equip- ment on rough, rolling terrain or hills.

1.Select desired height of cut.

2.Start mower blades by engaging at- tachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deﬂector shield in place.

Attachment Clutch Lever

“Engaged” Position

Attachemnt

Lift Lever

High Position

Low

Position

“Disengaged” Position

	Deﬂector
01931	Shield

TO OPERATE ON HILLS

WARNING: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope. Use the slope guide provided at the back of this manual.

•Choose the slowest speed before start- ing up or down hills.

•Avoid stopping or changing speed on hills.

•If slowing is necessary, move throttle control lever to slower position.

•If stopping is absolutely necessary, push clutch/brake pedal quickly to brake posi- tion and engage parking brake.

•Move gearshift lever to 1st gear. Be sure you have allowed room for tractor to roll slightly as you restart movement.

•To restart movement, slowly release parking brake and clutch/brake pedal.

•Make all turns slowly.

TO TRANSPORT

•Raise attachment lift to highest position with attachment lift control.

•When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position.

•Do not push or tow tractor at more than

ﬁve (5) MPH.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TOWING CARTS AND OTHER ATTACH- MENTS

Tow only the attachments that are recom- mended by and comply with speciﬁcations of the manufacturer of your tractor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

CHECK ENGINE OIL LEVEL

The engine in your tractor has been shipped, from the factory, already ﬁlled with summer weight oil.

1.Check engine oil with tractor on level ground.

2.Remove oil ﬁll cap/dipstick and wipe clean, reinsert the dipstick and screw cap tight, wait for a few seconds, re- move and read oil level. If necessary, add oil until “FULL” mark on dipstick is

reached. Do not overﬁll.

•For cold weather operation you should change oil for easier starting (See “OIL VISCOSITY CHART” in the Mainte- nance section of this manual).

•To change engine oil, see the Mainte- nance section in this manual.

189956, 271190 specifications

The Poulan 189956,271190 is a standout product in the realm of outdoor power equipment, specifically designed for lawn care and maintenance. This model is known for its impressive combination of power, efficiency, and usability, making it an ideal choice for both homeowners and professional landscapers alike.

One of the primary features of the Poulan 189956,271190 is its robust engine. Typically equipped with a reliable two-cycle engine, this product delivers considerable power, making quick work of trimming and clearing yard debris. The engine’s design ensures efficient fuel consumption, allowing users to maximize their operational time without frequent refueling.

In terms of cutting performance, the Poulan 189956,271190 is engineered with a precision cutting system. This includes a high-quality cutting blade that guarantees clean cuts and effective trimming. The adjustable cutting height feature allows users to customize the cutting depth based on their specific lawn requirements, ensuring optimal results every time.

User comfort and convenience are also prioritized with this model. The ergonomic design provides a comfortable grip and reduced vibration, minimizing user fatigue during extended periods of operation. The lightweight construction of the equipment contributes to ease of handling, allowing for agile maneuvering around obstacles in the garden or lawn.

Technologically, the Poulan 189956,271190 incorporates innovations that enhance performance and durability. The air filtration system, for example, is designed to extend the lifespan of the engine by reducing dust and debris intake. Additionally, the easy-start mechanism simplifies the ignition process, enabling users to get started quickly without unnecessary hassle.

Safety features are another significant aspect of the Poulan 189956,271190. The model typically comes with a protective guard that shields operators from flying debris, while also providing a secure operating environment. The tool’s design includes safety switches and mechanisms that prevent accidental starting, ensuring a safe user experience.

In summary, the Poulan 189956,271190 is a reliable, efficient, and user-friendly option for outdoor maintenance. Its powerful engine, adjustable cutting features, ergonomic design, and safety mechanisms make it a preferred choice for anyone looking to maintain their garden or lawn effectively. With advanced technologies and thoughtful features, this model stands out in its category, delivering excellent performance whether for personal use or professional landscaping tasks.