Poulan 271190, 189956 manual HOW to SET UP Your Tractor, Install Seat, Check Battery

Page 8

HOW TO SET UP YOUR TRACTOR

INSTALL SEAT

Adjust seat before tightening adjustment knob.

1.Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

2.Pivot seat upward and remove from the cardboard packing. Remove the cardboard packing and discard.

3.Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

4.Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

5.Pivot seat and pan forward and as- semble adjustment knob and flat washer loosely. Do not tighten.

6.Lower seat into operating position and sit in seat.

7.Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

8.Get off seat without moving its ad- justed position.

9.Raise seat and tighten adjustment knob securely.

Seat Shoulder

Bolt

Seat Pan

Flat Washer

Adjustment

 

Knob

02464

CHECK BATTERY

1.Lift seat pan to raised position. NOTE: If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in Maintenance section of this manual for charging instruc- tions).

Seat pan

Label

Terminal

Terminal

02602

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls)

1.Press lift lever plunger and raise attachment lift lever to its highest po- sition.

2.Release parking brake by depressing clutch/brake pedal.

3.Place gearshift lever in neutral (N) position.

4.Roll tractor forward off skid.

5.Remove banding holding deflector shield up against tractor.

TO DRIVE TRACTOR OFF SKID (See Operation section for location and function of controls)

WARNING: Before starting, read, un- derstand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

1.Be sure all the above assembly steps have been completed.

2.Check engine oil level and fill fuel tank with gasoline.

3.Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

4.Place gear shift lever in neutral (N) position.

5.Press lift lever plunger and raise attachment lift lever to its highest posi- tion.

6.Start the engine. After engine has started, move throttle control to idle position.

7.Depress clutch/brake pedal into full "BRAKE" position and hold. Move gearshift lever to 1st gear.

8.Slowly release clutch/brake pedal and slowly drive tractor off skid.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Model no Table of Contents IV. Service III. ChildrenWash hands after handling Product Specifications Customer ResponsibilitiesAPI-SF-SJ U1RUnassembled Parts Tools Required for Assembly To Remove Tractor from CartonBefore Removing Tractor from Skid Unpack CartonCheck Battery HOW to SET UP Your TractorInstall Seat Check Tire Pressure Check for Proper Position of ALL BeltsCheck Deck Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine To Start Engine ADD GasolineMowing Tips General Recommendations Lubrication Chart Before Each USETractor Engine AIR FilterCleaning Engine Cooling SystemMuffler Spark PlugsTo Install Mower To Remove MowerTo Level Mower Housing SIDE-TO-SIDE AdjustmentTo Replace Mower Blade Drive Belt Belt RemovalBelt Installation To Check and Adjust BrakeTo Adjust Brake To Check BrakeTo Start Engine with a Weak Battery To Adjust Steering Wheel ALIGN- MentReplacing Battery Front Wheel TOE-IN/CAMBERTo Adjust Carburetor Battery OtherFuel System Engine OILTroubleshooting Chart Problem Cause CorrectionExcessive Mower blades will Schematic Tractor -- Model NumberRepair Parts ElectricalKEY Part Description Chassis and Enclosures 174620 Chassis 176554 Drawbar 155272 Ground Drive Bolt Hex 7/16-20 x 4 Gr -1.5 Thr Steering KEY Part NO. NO. Description Engine Optional Equipment Engine Seat Assembly Decals Wheels and TiresLift Assembly Retainer Spring Mower Deck Screw Hex Thd Cut 1/4-20 x 1/2 Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation

189956, 271190 specifications

The Poulan 189956,271190 is a standout product in the realm of outdoor power equipment, specifically designed for lawn care and maintenance. This model is known for its impressive combination of power, efficiency, and usability, making it an ideal choice for both homeowners and professional landscapers alike.

One of the primary features of the Poulan 189956,271190 is its robust engine. Typically equipped with a reliable two-cycle engine, this product delivers considerable power, making quick work of trimming and clearing yard debris. The engine’s design ensures efficient fuel consumption, allowing users to maximize their operational time without frequent refueling.

In terms of cutting performance, the Poulan 189956,271190 is engineered with a precision cutting system. This includes a high-quality cutting blade that guarantees clean cuts and effective trimming. The adjustable cutting height feature allows users to customize the cutting depth based on their specific lawn requirements, ensuring optimal results every time.

User comfort and convenience are also prioritized with this model. The ergonomic design provides a comfortable grip and reduced vibration, minimizing user fatigue during extended periods of operation. The lightweight construction of the equipment contributes to ease of handling, allowing for agile maneuvering around obstacles in the garden or lawn.

Technologically, the Poulan 189956,271190 incorporates innovations that enhance performance and durability. The air filtration system, for example, is designed to extend the lifespan of the engine by reducing dust and debris intake. Additionally, the easy-start mechanism simplifies the ignition process, enabling users to get started quickly without unnecessary hassle.

Safety features are another significant aspect of the Poulan 189956,271190. The model typically comes with a protective guard that shields operators from flying debris, while also providing a secure operating environment. The tool’s design includes safety switches and mechanisms that prevent accidental starting, ensuring a safe user experience.

In summary, the Poulan 189956,271190 is a reliable, efficient, and user-friendly option for outdoor maintenance. Its powerful engine, adjustable cutting features, ergonomic design, and safety mechanisms make it a preferred choice for anyone looking to maintain their garden or lawn effectively. With advanced technologies and thoughtful features, this model stands out in its category, delivering excellent performance whether for personal use or professional landscaping tasks.
Top Page Image Contents