1)Select which options to install.
Editor: The P-touch Editor Version 3.1 software
Clip Art: | The illustrations for the P-touch Editor Version 3.1 Clip Art func- |
| tion |
Fonts: | The 13 fonts |
Auto Format | |
Templates: | The templates for the Auto Format function |
User’s Guide: | The User’s Guide (HTML) for the P-touch Editor Version 3.1 (The |
| User’s Guide can also be viewed from the CD-ROM.) |
Help: | The help files for P-touch Editor Version 3.1 |
If the Change button can be clicked while an option is selected, sub-components can be selected. Click the Change button to display the Select Sub-components dialog box, and then select the sub-components that you wish to install by putting a check mark beside them. If certain options or sub-components are not installed, some P-touch Editor functions may not be available. After selecting the desired sub-components, click the Continue button.
2) Click the Next button to begin installation.
9After P-touch Editor is installed, a dialog box appears, allowing you to select whether or not to install the printer driver.
To install the printer driver, click the Yes but- ton. The first Driver Setup dialog box appears, informing you that the PT-2300/2310 printer driver will be installed. Continue with the procedure in
To install the USB printer driver below.
If the printer driver is already installed, click the No button, restart the computer, and then remove the CD-ROM from the CD-ROM drive.
To install the USB printer driver:
With Plug-and-Play, new devices connected to the system are detected, and their drivers are automatically installed. If the PT-2300/2310 is to be connected through the USB port, its driver will be installed with Plug-and-Play. Be sure to read the installation instructions described below before installing the file supplied on the CD-ROM.
☞Be sure not to connect the PT-2300/2310 until you are instructed to do so.
