INSTALLING P-TOUCH EDITOR
The P-touch Editor software adds even more illustration and layout features to the label-mak- ing possibilities available with your PT-2300/2310.
☞Do not connect the PT-2300/2310 to the computer before installing the P-touch Editor software, otherwise it may not be installed correctly. Be sure not to connect the PT- 2300/2310 until you are instructed to do so.
On an IBM PC-Compatible Computer
To install the P-touch Editor software:
1Check that your system configuration meets the following requirements.
Computer: IBM PC or compatible
Operating system: Microsoft® Windows® 2000 or pre-installed with Microsoft® Win- dows® 98/98SE/Me
Hard disk free space: At least 20 MB
☞A few hundred megabytes of additional free space may be needed when printing long labels or large amounts of data.
Available memory: Minimum 32 MB
Monitor: VGA or higher graphics card
USB port
CD-ROM drive
2Insert the P-touch Editor Version 3.1 CD- ROM into the computer’s CD-ROM drive. A dialog box automatically appears, allowing you to select the language.
☞If the dialog box does not automatically appear, double-click “My Computer” on the desktop, double-click the icon for the CD-ROM drive containing the CD- ROM, and then double-click “Setup.exe” to display the dialog box.
