Error Message | Cause | Remedy |
|
|
|
NO | This message appears if you try to print | Install a tape cassette and try |
TAPE! | a label or feed the tape when no tape | again. |
| cassette is installed. |
|
|
|
|
REPLACE | This message appears if the installed | Replace the batteries or use the |
BATTERIES! | alkaline batteries are about to run | AC adaptor. |
| out. |
|
|
|
|
ROM | This message appears if there is a | Contact your service representa- |
PROBLEM! | problem with the machine’s read | tive. |
| only memory. | Turn off the machine, and then |
|
| while holding down c and |
|
| R, turn the machine back on. |
|
|
|
SOLDER X | This message appears if there is a | Contact your service representa- |
| problem with the machine’s software. | tive. |
|
|
|
TAB | This message appears if 50 tabs have | Limit the number of tabs in the |
LIMIT! | already been added to the text when | text to 50. |
| you press Q. |
|
|
|
|
TEXT | This message appears if the size of | Reduce the size of the characters |
TOO HIGH! | the text is larger than the width of the | or install a wider tape. |
| installed tape. |
|
|
|
|
TEXT | This message appears if the length of | Delete some of the text, reduce |
TOO LONG! | the text is longer than the label length | the character width or increase |
| that has been set using the Length | the set label length. |
| function. |
|
|
|
|
65
