Installing the Serial Touch Driver

Installing the Serial Touch Driver for Windows 7, Windows Vista,

Windows XP, Windows 2000, ME, 95/98 and NT4.0.

NOTE: For Windows 2000 and NT4.0 you must have administrator access rights to install the driver.

Make sure the serial connector (RS232) is plugged into the monitor and an open com port on the PC.

1Insert the Elo CD-ROM in your computer's CD-ROM drive.

2If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the CD and starts the setup program.

3Follow the directions on the screen to complete the driver setup for your version of Windows.

4If the AutoStart feature is not active:

5Click Start > Run.

6Click the Browse button to locate the EloCd.exe program on the CD-ROM.

7Click Open, then OK to run EloCd.exe.

8Follow the directions on the screen to complete the driver setup for your version of Windows.

2-16

Page 29
Image 29
Elo TouchSystems 2400LM manual Installing the Serial Touch Driver, Click Start Run