Caution
•Power cord is used as a disconnection device. To de-energize equipment, disconnect the power cord.
•This unit must follow the national requirement and local state laws to dispose unit.
•Before connecting the cables to your Elo touchmonitor, make sure all components are powered OFF.
Only approved components complying with IEC60601-1 series can be connected to ET2400LM in Patient Environment. The use of ACCESSORY equipment not complying with the equivalent safety requirements of this equipment may lead to a reduced safety of the resulting system. Consideration relating to the choices of accessory equipment should include:· Use of accessory in the patient environment.· Evidence that the safety certification of the accessory has been performed in accordance to the appropriate IEC 60601-1 and/or IEC 60601-1-1 har monized national standard.
•For continued safety -
- This unit only complies to the above standards if used with a medical grade power cord.
-A medical grade power supply, such as the one specified, is required for use in a medical application.
Note:
• This symbol alerts the user to important information concerning the operation and maintenance of this unit, which should be read carefully to avoid problems.
• This symbol means DC Current.
• This symbol means ON/OFF stand-by switch.
