Poulan CN1842STA manual Tractor

Page 17

TRACTOR

Always observe safety rules when per- forming any maintenance.

BRAKE OPERATION

If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted. (See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual).

TIRES

•Maintain proper air pressure in all tires (See “PRODUCT SPECIFICATIONS” section of this manual).

•Keep tires free of gasoline, oil, or insect control chemicals which can harm rub- ber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may

cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock systems are working properly. If your trac- tor does not function as described, repair the problem immediately.

•The engine should not start unless the brake pedal is fully depressed and attachement clutch control is in the disengaged position.

•When the engine is running, any at- tempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

•When the engine is running and the attachment clutch is engaged, any at- tempt by the operator to leave the seat should shut off the engine.

•The attachment clutch should never op- erate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be kept sharp. Replace bent or damaged blades.

BLADE REMOVAL

1.Raise mower to highest position to al- low access to blades.

2.Remove blade bolt, lock washer and flat washer securing blade.

3.Install new or resharpened blade with

trailing edge up towards deck as shown. IMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly.

4.Reassemble blade bolt, lock washer and flat washer in exact order as shown.

5.Tighten blade bolt securely (27-35 Ft. Lbs. torque).

IMPORTANT: Blade bolt is heat treated. If bolt needs replacing, replace only with approve bolt shown in the Repair Parts.

Trailing

 

 

Mandrel

 

 

Assembly

Edge Up

Blade

 

 

 

Flat

 

2

 

0

14

 

 

1

 

Washer

 

 

 

Lock

 

 

 

Washer

 

 

 

Blade Bolt

 

 

Star

Center Hole

 

 

 

 

 

TO SHARPEN BLADE

NOTE: We do not recommend sharp- ening blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will cause excessive vibration and eventual damage to mower and engine.

•The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone balancer, follow the instructions supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

•Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

Center Hole

01202

 

5/8" Bolt

Blade

or Pin

 

BATTERY

Your tractor has a battery charging system which is sufficient for normal use. How- ever, periodic charging of the battery with an automotive charger will extend its life.

•Keep battery and terminals clean.

•Keep battery bolts tight.

•Keep small vent holes open.

•Recharge at 6-10 amperes for 1 hour.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Model NO. CN1842STA Warranty Table of ContentsII. Slope Operation Safety RulesGeneral Operation Do not IV. ServiceIII. Children Safety Rules API-SF-SJ Product SpecificationsCustomer Responsibilities Unassembled Parts HOW to SET UP Your Tractor Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidCheck Battery To Convert to Bagging or Discharging Install Mulcher PlateCheck Tire Pressure Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine Mowing Tips To Start EngineBefore Each USE MaintenanceGeneral Recommendations Tractor Engine Muffler CleaningSpark Plugs IN-LINE Fuel FilterTo Remove Mower Service and AdjustmentsTo Install Mower SIDE-TO-SIDE Adjustment To Level Mower HousingTo Replace Motion Drive Belt To Check and Adjust BrakeTo Replace Mower Blade Drive Belt To Start Engine with a Weak Battery To Adjust Steering Wheel ALIGN- MentFront Wheel TOE-IN/CAMBER To Remove Wheel for RepairsTo Adjust Carburetor Other BatteryFuel System Engine OILProblem Cause Correction Troubleshooting ChartExcessive Poor grass Suggested Guide for Sighting Slopes for Safe Operation

CN1842STA specifications

The Poulan CN1842STA is a versatile and reliable riding lawn mower designed to make lawn care efficient and straightforward. With its robust features and reliable performance, this mower is ideal for homeowners with medium to large-sized lawns.

One of the standout features of the Poulan CN1842STA is its powerful 18.5 HP Briggs & Stratton engine. This engine provides ample power for cutting through thick grass and tackling uneven terrain. The easy-starting engine ensures that users spend less time preparing and more time mowing.

The cutting deck of the CN1842STA is a 42-inch wide design, which allows for a larger cutting path while maintaining maneuverability around obstacles. The deck height can be easily adjusted to suit various grass lengths, providing flexibility in lawn care. With a cutting height range of 1 to 4 inches, users can customize their lawn treatment according to seasonal needs.

Another attractive aspect of this riding mower is its hydrostatic transmission. Unlike traditional gear-driven mowers, the hydrostatic transmission allows for smooth, effortless speed changes. This makes it easier to navigate tight spots or slow down for detailed trimming work.

The Poulan CN1842STA also features a comfortable high-back seat designed to reduce fatigue during long mowing sessions. The steering wheel is ergonomically designed, offering users excellent control and maneuverability. Moreover, the intuitive dashboard provides essential information at a glance, ensuring the operator can monitor performance without losing focus on the task.

Built with durability in mind, the CN1842STA features a rugged frame and strong chassis, designed to withstand the rigors of outdoor use. The mower's design incorporates a reinforced cutting deck, ensuring it can handle tough mowing conditions without compromising performance.

The Poulan CN1842STA is also equipped with ease of maintenance in mind. Access points for the engine and cutting deck are designed for convenience, allowing for quick oil changes and blade sharpening.

Overall, the Poulan CN1842STA offers an excellent blend of power, comfort, and reliability, making it a valuable asset for anyone looking to maintain a well-manicured lawn with minimal effort. With its combination of user-friendly features and robust technology, this riding mower stands out as a top choice for lawn care enthusiasts.
Top Page Image Contents